Vacuum Cups and Suction Cups
P-Series - B 1.5 Bellows Vacuum Cups and Suction Cups

View Printer-Friendly PDF Page

Vacuum Cup Materials:

The standard materials are Neoprene (NEO) and Silicone (SIT).
For more information on the materials, Click Here.

Ideal for use where level compensation is desired on an irregularly shaped object, where a vertical offset motion is involved, for use on curved surfaces, or for separating thin work pieces. Available in sizes from 0.40 to 6.10 inches (11 to 156 mm)

NOTE: Click on any of the the small thumbnail photos in this chart to enlarge for more detail and specifications.

Product
Photo
(Click to Enlarge)

ANVER
and P-Series
Description
and Part No.

Static
Diameter*
in.
(mm)

Com-
pressed
Diameter*
in.
(mm)

Static
Height*
in.
(mm)

Com-
pressed
Height*
in.
(mm)

Load
Capacity
at 24 in. Hg
(609.6mm Hg)
[2:1 Safety Factor]
lb
(kg)

Pull-Off
Capacity
at 27 in. Hg
(685.8mm Hg)
[1:1 Safety Factor]
lb
(kg)

Level
Compensator
Suspensions
(Click Image for
More Info)

B10 Cups

B10-NEO
(Nitrile)
A-3150101
31.50.101

0.43
(11.0)

0.42
(10.6)

0.60
(16.0)

0.52
(13.2)

0.49
(0.22)

1.10
(0.50)

ANVER SLSA-1 Level Compensator Suspensions

B10-SIT
(Translucent Silicone)
A-3150101S
31.50.101S

0.43
(11.0)

0.42
(10.6)

0.60
(16.0)

0.52
(13.2)

0.49
(0.22)

1.10
(0.50)

B10 Cups with Fitting

Static Dia.

Max. Dia.

Static Ht.

Comp. Ht.

Load Cap.

Pull-Off Cap.

Suspensions

B10-NEO/FIT
(Nitrile)
A-3150023
31.50.023

0.43
(11.0)

0.42
(10.6)

1.00
(25.0)

0.92
(23.4)

0.49
(0.22)

1.10
(0.50)

B10-SIT/FIT
(Translucent Silicone)
A-3150023S
31.50.023S

0.43
(11.0)

0.42
(10.6)

1.00
(25.0)

0.92
(23.4)

0.49
(0.22)

1.10
(0.50)

B10-2 Cups

Static Dia.

Max. Dia.

Static Ht.

Comp. Ht.

Load Cap.

Pull-Off Cap.

Suspensions

B10-2-NEO
(Nitrile)
A-B10-2.10
B10-2.10

0.43
(11.0)

0.42
(10.6)

0.60
(16.0)

0.52
(13.2)

0.49
(0.22)

1.10
(0.50)

B10-2-SIT
(Translucent Silicone)
A-B10-2.20
B10-2.20

0.43
(11.0)

0.42
(10.6)

0.60
(16.0)

0.52
(13.2)

0.49
(0.22)

1.10
(0.50)

B10-2 Cups with Fitting

Static Dia.

Max. Dia.

Static Ht.

Comp. Ht.

Load Cap.

Pull-Off Cap.

Suspensions

B10-2-NEO/FIT
(Nitrile)
A-B10-2.10.01AC
B10-2.10-01AC

0.43
(11.0)

0.42
(10.6)

1.00
(25.0)

0.92
(23.4)

0.49
(0.22)

1.10
(0.50)

B10-2-SIT/FIT
(Translucent Silicone)
A-B10-2.20.01AC
B10-2.20-01AC

0.43
(11.0)

0.42
(10.6)

1.00
(25.0)

0.92
(23.4)

0.49
(0.22)

1.10
(0.50)

Fittings for B10 Cups

Notes

Other Fittings

Suspensions

BM5 FITTING M5 MALE
Replaces
10-15 FITTING
A-3107030
31.07.030
01AC

The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions.

10-32 FITTING UNF MALE

BM10-32
01AC

The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Comes with captured O-ring for a vacuum tight seal. Popular alternate fitting for the North American market.

B15 Cups

Static Dia.

Max. Dia.

Static Ht.

Comp. Ht.

Load Cap.

Pull-Off Cap.

Suspensions

B15-NEO
(Nitrile)
A-3150230
31.50.230
B15-2.10

0.60
(16.0)

0.66
(16.8)

0.80
(20.0)

0.59
(14.8)

0.89
(0.40)

2.00
(0.91)

B15-SIT
(Translucent Silicone)
A-3150230S
31.50.230S
B15-2.20

0.60
(16.0)

0.66
(16.8)

0.80
(20.0)

0.59
(14.8)

0.89
(0.40)

2.00
(0.91)

B15 Cups with Fittings

Static Dia.

Max. Dia.

Static Ht.

Comp. Ht.

Load Cap.

Pull-Off Cap.

Suspensions

B15-NEO/FIT
(Nitrile)
A-3250037
32.50.037
B15-2.10.01AC

0.60
(16.0)

0.66
(16.8)

1.00
(28.0)

0.79
(20.1)

0.89
(0.40)

2.00
(0.91)

B15-SIT/FIT
(Translucent Silicone)
A-3250037S
32.50.037S
B15-2.20-01AC

0.60
(16.0)

0.66
(16.8)

1.00
(28.0)

0.79
(20.1)

0.89
(0.40)

2.00
(0.91)

Fittings for B15 Cups

Notes

Other Fittings

Suspensions

BM5 FITTING M5 MALE
Replaces
10-15 FITTING
A-3107030
31.07.030
01AC

The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions.

10-32 FITTING UNF
MALE

BM10-32
01AC

The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Comes with captured O-ring. Popular alternate fitting for North America.

B20 Cups

Static Dia.

Max. Dia.

Static Ht.

Comp. Ht.

Load Cap.

Pull-Off Cap.

Suspensions

B20-NEO
(Nitrile)
A-3150103
31.50.103
B20.10

0.90
(22.0)

0.85
(21.5)

0.80
(19.0)

0.49
(21.5)

1.38
(0.62)

3.10
(1.41)

B20-SIT
(Translucent Silicone)
A-3150103S
31.50.103S
B20.20

0.90
(22.0)

0.85
(21.5)

0.80
(19.0)

0.49
(12.5)

1.38
(0.62)

3.10
(1.41)

A-B20-P60
(Thermo-elastic Polyurethane)

0.90
(22.0)

0.85
(21.5)

0.80
(19.0)

0.49
(12.5)

1.38
(0.62)

3.10
(1.41)

B20 Cups with 20-30 Fitting

Static Dia.

Max. Dia.

Static Ht.

Comp. Ht.

Load Cap.

Pull-Off Cap.

Suspensions

B20-NEO/1PC FIT
(Nitrile)
A-3150025A
31.50.025A
B20.10.02AD

0.90
(22.0)

0.85
(21.5)

1.10
(29.0)

0.79
(20.1)

1.38
(0.62)

3.10
(1.41)

B20-SIT/1PC FIT
(Translucent Silicone)
A-3150025SA
31.50.025SA
B20.20.02AD

0.90
(22.0)

0.85
(21.5)

1.10
(29.0)

0.79
(20.1)

1.38
(0.62)

3.10
(1.41)

B20 Cups with 20-30 Connection Plate

Static Dia.

Max. Dia.

Static Ht.

Comp. Ht.

Load Cap.

Pull-Off Cap.

Suspensions

B20-NEO/FIT/SCREEN
(Nitrile)
A-3150025
31.50.025
B20.10.02AF

0.90
(22.0)

0.85
(21.5)

1.00
(26.0)

0.69
(17.5)

1.38
(0.62)

3.10
(1.41)

B20-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150025S
31.50.025S
B20.20.02AF

0.90
(22.0)

0.85
(21.5)

1.00
(26.0)

0.69
(17.5)

1.38
(0.62)

3.10
(1.41)

Fittings for B20 Cups

Notes

Suspensions

20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

STRENGTHENING
RING SILICONE 20/30

A-0101084
01.01.084S

The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

20-30 CONNECTION PLATE

A-3150141
31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

20-30 LOCKING SPACER

A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

B30 Cups

Static Dia.

Max. Dia.

Static Ht.

Comp. Ht.

Load Cap.

Pull-Off Cap.

Suspensions

B30-NEO
(Nitrile)
A-3150104
31.50.104
B30.10

1.30
(34.0)

1.34
(34.0)

1.00
(26.0)

0.75
(19.0)

2.09
(0.95)

4.70
(2.13)

B30-SIT
(Translucent Silicone)
A-3150104S
31.50.104S
B30.20

1.30
(34.0)

1.34
(34.0)

1.00
(26.0)

0.75
(14.0)

2.09
(0.95)

4.70
(2.13)

A-B30-P60
(Thermo-elastic Polyurethane)

1.30
(34.0)

1.34
(34.0)

1.00
(26.0)

0.75
(14.0)

2.09
(0.95)

4.70
(2.13)

B30 Cups with 20-30 Fitting

Static Dia.

Max. Dia.

Static Ht.

Comp. Ht.

Load Cap.

Pull-Off Cap.

Suspensions

B30-NEO/1PC FIT
(Nitrile)
A-3150026A
31.50.026A
B30.10.02AD

1.30
(34.0)

1.34
(34.0)

1.30
(34.0)

1.05
(26.7)

2.09
(0.95)

4.70
(2.13)

B30-SIT/1PC FIT
(Translucent Silicone)
A-3150026SA
31.50.026SA
B30.20.02AD

1.30
(34.0)

1.34
(34.0)

1.30
(34.0)

1.05
(26.7)

2.09
(0.95)

4.70
(2.13)

B30 Cups with 20-30 Connection Plate

Static Dia.

Max. Dia.

Static Ht.

Comp. Ht.

Load Cap.

Pull-Off Cap.

Suspensions

B30-NEO/FIT/SCREEN
(Nitrile)
A-3150026
31.50.026AF

1.30
(34.0)

1.34
(34.0)

1.30
(34.0)

1.05
(26.7)

2.09
(0.95)

4.70
(2.13)

B30-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150026S
31.50.026SAF

1.30
(34.0)

1.34
(34.0)

1.30
(34.0)

1.05
(26.7)

2.09
(0.95)

4.70
(2.13)

Fittings for B30 Cups

Notes

Suspensions

20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

STRENGTHENING
RING SILICONE 20/30

A-0101084
01.01.084S

The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.