ANVER Vacuum Cups, Vacuum Lifters, Vacuum Pumps, Vacuum Tube Lifters, Vacuum Sheet and Plate Lifters, Vacuum End-EffectorsVacuum Cups and Suction Cups
P-Series - D Deep Vacuum Cups and Suction Cups

View Printer-Friendly PDF Page

Vacuum Cup Materials:

  • The standard materials are Neoprene (NEO) and Silicone (SIT).

  • For more information on the materials, Click Here.

Ideal for use on curved or irregular surfaces or for lifting across corners and edges. Available in sizes from 0.65 to 2.10 inches (16.5 to 53.0mm).

NOTE: Click on any of the the small thumbnail photos in this chart to enlarge for more detail and specifications.

Product
Photo
(Click to Enlarge)

ANVER and
P-Series
Description
and Part #

 Static 
Dia.*
 in.
(mm)		 Maximum
Compressed
Dia.*
 in.
(mm)		 Static 
Height*
 in.
(mm)		 Compressed
Height*
 in.
(mm)		 Load Capacity
at 24 in. Hg
(609.6mm Hg)
[2:1 Safety Factor]
lb
(kg)		 Pull-Off Capacity
at 27 in. Hg
(685.8mm Hg)
[1:1 Safety Factor]
lb
(kg)

Level
Compensator
Suspensions
 (Click Image for
More Info)
D15 Cups
A-3150135

 D15-NEO
 (Nitrile)
 A-3150135
 31.50.135
D15-2.10

0.65
(16.5)

0.78
(20.0)

 0.65
(16.5)		 0.49
(12.4)		 1.02
(0.46)		 2.50
(1.13)		 ANVER SLSA-1 Series Suspensions
A-3150135S

D15-SIT
(Translucent Silicone)
 A-3150135S
 31.50.135S
D15-2.20

 0.65
(16.5)		 0.78
(20.0)		 0.65
(16.5)		 0.49
(12.4)		 1.02
(0.46)		 2.50
(1.13)		 ANVER SLSA-1 Series Suspensions
D15 Cups with Fitting Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150010

D15-NEO/FITTING
(Nitrile)
 A-3150010
 31.50.010
D15-2.20.01AC

 0.65
(16.5)		 0.78
(20.0)		 1.01
(25.5)		 0.85
(21.6)		 1.02
(0.46)		 2.50
(1.13)		 ANVER SLSA-1 Series Suspensions
A-3150010S

D15-SIT/FITTING
(Translucent Silicone)
 A-3150010S
 31.50.010S
D15-2.20.01AC

 0.65
(16.5)		 0.78
(20.0)		 1.01
(25.5)		 0.85
(21.6)		 1.02
(0.46)		 2.50
(1.13)		 ANVER SLSA-1 Series Suspensions
Fitting for D15 Cups Notes Other Fittings Suspensions
BM5 BM5 FITTING M5 MALE
Replaces
10-15 FITTING
A-3107030
31.07.030
01AC

The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions.

 Group 1 Fittings ANVER SLSA-1 Series Suspensions
BM10-32-OR

10-32 FITTING UNF MALE

BM10-32
01AC

The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Comes with captured O-ring for a vacuum tight seal. Popular alternate fitting for the North American market.

 Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
D20 Cups Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150136

D20-NEO
(Nitrile)
A-3150136
 31.50.136
D20-2.10

 0.90
(22.0)		 1.10
(28.0)		 0.50
(13.0)		 0.38
(9.5)		 1.78
(0.81)		 4.00
(1.81)

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
A-3150136S

D20-SIT
(Translucent Silicone)
A-3150136S
 31.50.136S
D20-2.20

 0.90
(22.0)		 1.10
(28.0)		 0.50
(13.0)		 0.38
(9.5)		 1.78
(0.81)		 4.00
(1.81)

ANVER SLSA-1 Series Suspensions 
SLSA-2 Level Compensator Suspensions
D20 Cups with 20-30 Fitting Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150011A

D20-NEO/1PC FITTING
(Nitrile)
A-3150011A
 31.50.011A
D20-2.10.02AF

 0.90
(22.0)		 1.10
(28.0)		 0.90
(23.0)		 0.78
(19.8)		 1.78
(0.81)		 4.00
(1.81)

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
A-3150011SA

D20-SIT/1PC FITTING
(Translucent Silicone)
A-3150011SA
 31.50.011SA
D20-2.20.02AF

 0.90
(22.0)		 1.10
(28.0)		 0.90
(23.0)		 0.78
(19.8)		 1.78
(0.81)		 4.00
(1.81)

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
D20 Cups with 20-30 Connection Plate Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150011

D20-NEO/FIT/SCREEN
(Nitrile)
A-3150011
 31.50.011

 0.90
(22.0)		 1.10
(28.0)		 0.80
(21.0)		 0.68
(17.1)		 1.78
(0.81)		 4.00
(1.81)

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
A-3150011S

D20-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150011S
 31.50.011S

 0.90
(22.0)		 1.10
(28.0)		 0.80
(21.0)		 0.68
(17.1)		 1.78
(0.81)		 4.00
(1.81)

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
Fittings for D20 Cups Notes Suspensions
A-3150196 20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

 HSHN5 Double Male 5 mm Adapter
ANVER SLSA-1 Series Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

 HS18G-18FG Double Female G 1/8" Adapter
SLSA-2 Level Compensator Suspensions
A-0101084

20-30 STRENGTHENING
RING SILICONE

A-0101084
 01.01.084S

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

 ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
A-3150141 20-30 CONNECTION PLATE

A-3150141
  31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.
ANVER SLSA-1 Series Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

 HS18G-18FG Double Female G 1/8" Adapter
SLSA-2 Level Compensator Suspensions
A-3150140 20-30 LOCKING SPACER

A-3150140
 31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

 ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
D30 Cups Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150137

D30-NEO
(Nitrile)
A-3150137
 31.50.137
D30-2.10

 1.30
(32.0)		 1.57
(40.0)		 0.70
(19.0)		 0.53
(13.5)		 3.11
(1.41)		 7.00
(3.18)

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
A-3150137S

D30-SIT
(Translucent Silicone)
A-3150137S
 31.50.137S
D30-2.20

 1.30
(32.0)		 1.57
(40.0)		 0.70
(19.0)		 0.53
(13.5)		 3.11
(1.41)		 7.00
(3.18)

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
D30 Cups with 20-30 Fitting Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150012A

D30-NEO/1PC FITTING
(Nitrile)
A-3150012A
 31.50.012A
D30-2.10.02AF

 1.30
(32.0)		 1.57
(40.0)		 1.12
(28.0)		 0.99
(25.1)		 3.11
(1.41)		 7.00
(3.18)

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
A-3150012SA

D30-SIT/1PC FITTING
(Translucent Silicone)
A-3150012SA
 31.50.012SA
D30-2.20.02AF

 1.30
(32.0)		 1.57
(40.0)		 1.12
(28.0)		 0.99
(25.1)		 3.11
(1.41)		 7.00
(3.18)

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
D30 Cups with 20-30 Connection Plate Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150012

D30-NEO/FIT/SCREEN
(Nitrile)
A-3150012
 31.50.012

 1.30
(32.0)		 1.57
(40.0)		 1.10
(27.0)		 0.93
(23.6)		 3.11
(1.41)		 7.00
(3.18)

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
A-3150012S

D30-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150012S
 31.50.012S

 1.30
(32.0)		 1.57
(40.0)		 1.10
(27.0)		 0.93
(23.6)		 3.11
(1.41)		 7.00
(3.18)

ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
Fittings for D30 Cups Notes Suspensions
A-3150196 20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.
ANVER SLSA-1 Series Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

 HS18G-18FG Double Female G 1/8" Adapter
SLSA-2 Level Compensator Suspensions
A-0101084

20-30 STRENGTHENING
RING SILICONE

A-0101084
 01.01.084S

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

 ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
A-3150141 20-30 CONNECTION PLATE

A-3150141
  31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.
ANVER SLSA-1 Series Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

 HS18G-18FG Double Female G 1/8" Adapter
SLSA-2 Level Compensator Suspensions
A-3150140 20-30 LOCKING SPACER

A-3150140
 31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

 ANVER SLSA-1 Series Suspensions
SLSA-2 Level Compensator Suspensions
D50 Cups Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150138

D50-NEO
(Nitrile)
A-3150138
 31.50.138
D50.10

 2.10
(53.0)		 2.40
(61.0)		 1.20
(31.0)		 0.99
(25.1)		 9.78
(4.44)		 22.00
(9.98)

A-3150138S

D50-SIT
(Translucent Silicone)
A-3150138S
 31.50.138S
D50.20

 2.10
(53.0) 		2.40
(61.0)		 1.20
(31.0)		 0.99
(25.1)		 9.78
(4.44)		 22.00
(9.98)

D50 Cups with 50/50-2 Fitting Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150013A

D50-NEO/1PC FITTING
(Nitrile)
A-3150013A
 31.50.013A
D50.10.05AG

 2.10
(53.0) 		2.40
(61.0)		 1.60
(40.0)		 1.39
(35.3)		 9.78
(4.44)		 22.00
(9.98)

A-3150013SA

D50-SIT/1PC FITTING
(Translucent Silicone)
A-3150013SA
 31.50.013SA
D50.20.05AG

 2.10
(53.0) 		2.40
(61.0)		 1.60
(40.0)		 1.39
(35.3)		 9.78
(4.44)		 22.00
(9.98)

D50 Cups with 50 Connection Plate Static Dia. Max. Dia. Static Ht. Comp. Ht Load Cap. Pull-Off Cap. Suspensions
A-3150013

D50-NEO/FIT/SCREEN
(Nitrile)
A-3150013
 31.50.013

 2.10
(53.0)		 2.40
(61.0)		 1.60
(40.0)		 1.39
(35.1)		 9.78
(4.44)		 22.00
(9.98)
A-3150013S

D50-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150013S
 31.50.013S

 2.10
(53.0) 		2.40
(61.0)		 1.60
(40.0)		 1.39
(35.1)		 9.78
(4.44)		 22.00
(9.98)

Fittings for D50 Cups Notes Suspensions
50/50-2 FITTING
 A-05AG
05AG
(Replaces
A-3250002)
 32.50.002

The 50/50-2 Fitting uses a 50 Strengthening Ring. The  50/50-2 Fitting allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" Thread.
A-0101086

50 STRENGTHENING
 RING SILICONE

A-0101086
 01.01.086S

The 50 Strengthening Ring is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.
A-3150145  50 CONNECTION PLATE

A-3150145
 31.50.145

The 50 Connection Plate uses a 50 Locking Spacer.  The A-3150145  50 Connection Plate allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" Thread.
A-3150144

 50 LOCKING SPACER

A-3150144
 31.50.144

The 50 Locking Spacer is used with the above 50 Connection Plate. It presses in from the bottom.
Click Here to See More Details of Different Suction Cup and Vacuum Cup Materials

* All cups shown above are identical in size and shape to P-Brand's cups. The dimensional drawings represent the cup dimensions without a load as given by P-Brand. The 'compressed' column specifications are important in making sure that everything fits, and represent the actual size of the cup after full compression (being flattened out) on a level load. (This difference is negligible in the F series.) The bigger the cup the greater the enlargement of the diameter. A lower vacuum level will lessen this compression (or flattening out); however, make sure to leave enough room for the static height of the cup in your design.

 The "G" thread is also known as BSPP, commonly used world-wide for Vacuum Applications.
Generic versions of the P-Series D Series Deep Vacuum Cups

Go to Suction Cup Main Page

 

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570
Home: www.anver.com    email:

Copyright © ANVER Corp. 2009

Terms of use