| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
View Printer-Friendly PDF Page
 |
Product |
ANVER
and P-Series |
Static Diameter* in. (mm) |
Static Height* in. (mm) |
Load Capacity at 24 in. Hg (609.6mm Hg) [2:1 Safety Factor] lb (kg) |
Pull-Off Capacity at 27 in. Hg (685.8mm Hg) [1:1 Safety Factor] lb (kg) |
Level Compensator Suspensions (Click Image for More Info) |
||||
| F30 Cups with Valves | |||||||||||
 |
F30-NEO/VALVE |
1.25 (31.6) |
0.40 (10.0) |
3.11 (1.41) |
7.00 (3.18) |
 |
|||||
 |
|||||||||||
 |
F30-SIT/VALVE |
1.25 (31.6) |
0.40 (10.0) |
3.11 (1.41) |
7.00 (3.18) |
|
|||||
|
|
|||||||||||
| Fitting & Valve for F30 Cups | Notes | Suspensions | |||||||||
 |
A-3150141 |
|
|
||||||||
|
|
|||||||||||
 |
A-3150055 |
The 30 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup's valve will not open, causing no loss of vacuum while the other cups pick up the load. |
|
||||||||
|
|
|||||||||||
| F40 Cups with Valves | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | ||||||
 |
F40-NEO/VALVE |
1.66 (42.1) |
0.80 (21.0) |
4.89 (2.22) |
11.00 (4.99) |
 |
|||||
 |
F40-SIT/VALVE |
1.66 (42.1) |
0.80 (21.0) |
4.89 (2.22) |
11.00 (4.99) |
|
|||||
| Fitting & Valve for F40 Cups | Notes | Suspensions | |||||||||
 |
A-3150143 |
The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" Thread. |
|
||||||||
 |
A-3150056 |
The 40 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup's valve will not open, causing no loss of vacuum while the other cups pick up the load. |
|
||||||||
| F50 Cups with Valves | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | ||||||
 |
F50-NEO/VALVE |
2.10 (52.8) |
1.10 (27.0) |
9.33 (4.23) |
21.00 (9.53) |
|
|||||
 |
F50-SIT/VALVE |
2.10 (52.8) |
1.10 (27.0) |
9.33 (4.23) |
21.00 (9.53) |
|
|||||
| Fitting & Valve for F50 Cups | Notes | Suspensions | |||||||||
 |
A-3150145 |
The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" Thread. |
|
||||||||
 |
A-3150057 |
The 50 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup's valve will not open, causing no loss of vacuum while the other cups pick up the load. |
|
||||||||
| F75 Cups with Valves | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | ||||||
 |
F75-NEO/VALVE |
3.02 (76.5) |
0.60 (14.0) |
26.67 (12.10) |
60.00 (27.22) |
|
|||||
 |
F75-SIT/VALVE |
3.02 (76.5) |
0.60 (14.0) |
26.67 (12.10) |
60.00 (27.22) |
|
|||||
| Fitting & Valve for F75 Cups | Notes | Suspensions | |||||||||
 |
A-3250006 |
The 75 Fitting 1/8" with 1/8" female center port connection with optional M5 (10/32) female port often used as a blow-off port. |
|
||||||||
 |
A-3350033 |
The 75 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup's valve will not open, causing no loss of vacuum while the other cups pick up the load. |
|
||||||||
| F110 Cups with Valves | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | ||||||
 |
F110-NEO/VALVE |
4.30 (112.5) |
0.70 (19.0) |
56.00 (25.40) |
126.00 (57.15) |
 |
|||||
 |
F110-SIT/VALVE |
4.30 (112.5) |
0.70 (19.0) |
56.00 (25.40) |
126.00 (57.15) |
|
|||||
| Fitting & Valve for F150 Cups | Notes | Suspensions | |||||||||
 |
A-3250007 |
The 110 Fitting 1/2" with 1/2" female center port connection with optional NPSF 1/8" female port often used as a blow-off port. |
|
||||||||
 |
A-3350034 |
The 110/150 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup's valve will not open, causing no loss of vacuum while the other cups pick up the load. |
|
||||||||
| F150 Cups with Valves | Static Diameter | Static Height | Load Capacity | Pull-Off Capacity | Suspensions | ||||||
|
|
F150-NEO/VALVE |
6.13 (155.6) |
1.00 (25.0) |
106.67 (48.38) |
240.00 (108.86) |
|
|||||
|
|
F150-SIT/VALVE |
6.13 (155.6) |
1.00 (25.0) |
106.67 (48.38) |
240.00 (108.86) |
|
|||||
| Fitting & Valve for F150 Cups | Notes | Suspensions | |||||||||
 |
A-3250008 |
The 150 Fitting 1/2" with 1/2" female center port connection with optional NPSF 1/8" female port often used as a blow-off port. |
|
||||||||
|
|
A-3350034 |
The 110/150 Button Valve is used in multiple cup applications. If a single cup does not contact the load, that cup's valve will not open, causing no loss of vacuum while the other cups pick up the load. |
|
||||||||
Many new Valve Cup Assembly Options are now available from ANVER by combining select ANVER cups and ANVER fittings to form ANVER Valve Cup Assemblies. Using the chart below, click on the 'Photo' to see an enlarged image of the completed ANVER Valve Cup Assembly. Click on the Cup Photo under 'Made from This Cup...' to get technical and ordering information for the appropriate cup; click on the Fitting Photo under '...and this Fitting' to get technical and ordering information for the appropriate fitting.
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
 |
The "G" thread is also known as BSPP, commonly used world-wide for Vacuum Applications. |
|
|
  |
 |
 |
Note:
- If you click on the small thumbnail photo it will enlarge for more detail and specifications.
- * All cups shown above are identical in size and shape to P-Brand's. The static column is the cup dimensions without a load as given by P-Brand.
- The compressed column specifications are the important ones to make sure everything fits. It is the actual size of the cup after full compression (being flattened out) on a level load which is slightly different on F series. The bigger the cup the greater the enlarging of the diameter. A lower vacuum level will lessen this compression or flattening out however make sure to leave enough room for the cup under vacuum in your design.
Go to Generic Suction Cup Main Page
| ||||||||