ANVER's F Series Flat Suction Cups

site map

Vacuum Cups and Suction Cups
P-Series - F Flat Cleated Vacuum Cups and Suction Cups with Cleats

View Printer-Friendly PDF Page

Vacuum Cup Materials:

The standard materials are Neoprene (NEO) and Silicone (SIT).
For more information on the materials, Click Here.

Ideal for use on plane surfaces, where minimum movement is required to maintain the pick-up area, and for support of pliable materials. Available in sizes from 0.65 to 6.13 inches (16.6 to 155.6mm).

NOTE: Click on any of the the small thumbnail photos in this chart to enlarge for more detail and specifications.

Product
Photo
(Click to Enlarge)

ANVER and
P-Series
Description
and Part No.

Static
Diameter *
in.
(mm)

Static
Height *
in.
(mm)

Load Capacity
at 24 in. Hg
(609.6mm Hg)
[2:1 Safety Factor]
lb
(kg)

Pull-Off Capacity
at 27 in. Hg
(685.8mm Hg)
[1:1 Safety Factor]
lb
(kg)

Level
Compensator
Suspensions
(Click Image for
More Info)

F15 Cups

F15-NEO
(Nitrile)
A-3150125
31.50.125
F15.10

0.65
(16.6)

0.40
(11.0)

1.11
(0.50)

2.50
(1.13)

F15-SIT
(Translucent Silicone)
A-3150125S
31.50.125S
F15.20

0.65
(16.6)

0.40
(11.0)

1.11
(0.50)

2.50
(1.13)

ANVER SLSA-1 Level Compensator Suspensions

F15 Cups with 10-15 Fitting

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F15-NEO/FITTING
(Nitrile)
A-3150014
31.50.014
F15.10.01AC

0.65
(16.6)

0.6
(14.0)

1.11
(0.50)

2.50
(1.13)

F15-SIT/FITTING
(Translucent Silicone)
A-3150014S
31.50.014S
F15.20.01AC

0.65
(16.6)

0.6
(14.0)

1.11
(0.50)

2.50
(1.13)

Fitting for F15 Cups

Notes

Other Fittings

Suspensions

BM5 FITTING M5 MALE
Replaces
10-15 FITTING
A-3107030
31.07.030
01AC

The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions.

10-32 FITTING UNF MALE

BM10-32
01AC

The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Comes with captured O-ring for a vacuum tight seal. Popular alternate fitting for the North American market.

F20 Cups

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F20-NEO
(Nitrile)
A-3150126
31.50.126
F20.10

0.87
(22.1)

0.30
(8.0)

1.87
(0.85)

4.20
(1.91)

F20-SIT
(Translucent Silicone)
A-3150126S
31.50.126S
F20.20

0.87
(22.1)

0.30
(8.0)

1.87
(0.85)

4.20
(1.91)

A-F20-P60
(Thermo-elastic
Polyurethane)

0.87
(22.1)

0.30
(8.0)

1.87
(0.85)

4.20
(1.91)

A-F20-P30
(Thermo-elastic
Polyurethane)**

0.87
(22.1)

0.30
(8.0)

1.87
(0.85)

4.20
(1.91)

A-F20-P50
(Thermo-elastic
Polyurethane)**

0.87
(22.1)

0.30
(8.0)

1.87
(0.85)

4.20
(1.91)

F20 Cups with 20-30 Fitting

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F20-NEO/1PC FITTING
(Nitrile)
A-3150015A
31.50.015A
F20.10.02AD

0.87
(22.1)

0.70
(18.0)

1.87
(0.85)

4.20
(1.91)

F20-SIT/1PC FITTING
(Translucent Silicone)
A-3150015SA
31.50.015SA
F20.20.02AD

0.87
(22.1)

0.70
(18.0)

1.87
(0.85)

4.20
(1.91)

F20 Cups with 20-30 Connection Plate

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F20-NEO/FIT/SCREEN
(Nitrile)
A-3150015
31.50.015
F20.10.02AF

0.87
(22.1)

0.60
(16.0)

1.87
(0.85)

4.20
(1.91)

F20-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150015S
31.50.015S
F20.20.02AF

0.87
(22.1)

0.60
(16.0)

1.87
(0.85)

4.20
(1.91)

Fitting for F20 Cups

Notes

Suspensions

20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

20-30 STRENGTHENING
RING SILICONE

A-0101084
01.01.084S

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

20-30 CONNECTION PLATE

A-3150141
31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

20-30 LOCKING SPACER

A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

F25 Cups

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F25-NEO
(Nitrile)
A-3150127
31.50.127
F25.10

1.08
(27.5)

0.30
(9.0)

2.49
(1.13)

5.60
(2.54)

F25-SIT
(Translucent Silicone)
A-3150127S
31.50.127S
F25.20

1.08
(27.5)

0.30
(9.0)

2.49
(1.13)

5.60
(2.54)

A-F25-P60
(Thermo-elastic
Polyurethane)

1.08
(27.5)

0.30
(9.0)

2.49
(1.13)

5.60
(2.54)

A-F25-P30
(Thermo-elastic
Polyurethane)**

1.08
(27.5)

0.30
(9.0)

2.49
(1.13)

5.60
(2.54)

A-F25-P50
(Thermo-elastic
Polyurethane)**

1.08
(27.5)

0.30
(9.0)

2.49
(1.13)

5.60
(2.54)

F25 Cups with 20-30 Fitting

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F25-NEO/1PC FITTING
(Nitrile)
A-3150016A
31.50.016A
F25.10.02AF

1.08
(27.5)

0.70
(19.0)

2.49
(1.13)

5.60
(2.54)

F25-SIT/1PC FITTING
(Translucent Silicone)
A-3150016SA
31.50.016SA
F25.20.02AF

1.08
(27.5)

0.70
(19.0)

2.49
(1.13)

5.60
(2.54)

F25 Cups with 20-30 Connection Plate

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F25-NEO/FIT/SCREEN
(Nitrile)
A-3150016
31.50.016

1.08
(27.5)

0.70
(17.0)

2.49
(1.13)

5.60
(2.54)

F25-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150016S
31.50.016S

1.08
(27.5)

0.70
(17.0)

2.49
(1.13)

5.60
(2.54)

Fitting for F25 Cups

Notes

Suspensions

20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

20-30 STRENGTHENING
RING SILICONE

A-0101084
01.01.084S

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

20-30 CONNECTION PLATE

A-3150141
31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

20-30 LOCKING SPACER

A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

F30 Cups

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F30-NEO
(Nitrile)
A-3150239
31.50.239
F30-2.10

1.25
(31.6)

0.40
(10.0)

3.11
(1.41)

7.00
(3.18)

F30-SIT
(Translucent Silicone)
A-3150239S
31.50.239S
F30-2.20

1.25
(31.6)

0.40
(10.0)

3.11
(1.41)

7.00
(3.18)

A-F30-P60
(Thermo-elastic
Polyurethane)

1.25
(31.6)

0.40
(10.0)

3.11
(1.41)

7.00
(3.18)

A-F30-P30
(Thermo-elastic
Polyurethane)**

1.25
(31.6)

0.40
(10.0)

3.11
(1.41)

7.00
(3.18)

A-F30-P50
(Thermo-elastic
Polyurethane)**

1.25
(31.6)

0.40
(10.0)

3.11
(1.41)

7.00
(3.18)

F30 Cups with 20-30 Fitting

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F30-NEO/1 PC FITTING
(Nitrile)
A-3250036A
32.50.036A
F30-2.10.02AF

1.25
(31.6)

0.70
(17.0)

3.11
(1.41)

7.00
(3.18)

F30-SIT/1PC FITTING
(Translucent Silicone)
A-3250036SA
32.50.036SA
F30-2.20.02AF

1.25
(31.6)

0.70
(17.0)

3.11
(1.41)

7.00
(3.18)

F30 Cups with 20-30 Connection Plate

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F30-NEO/FIT/SCREEN
(Nitrile)
A-3250036
32.50.036

1.25
(31.6)

0.70
(18.0)

3.11
(1.41)

7.00
(3.18)

F30-SIT/FIT/SCREEN
(Translucent Silicone)
A-3250036S
32.50.036S

1.25
(31.6)

0.70
(18.0)

3.11
(1.41)

7.00
(3.18)

Fitting for F30 Cups

Notes

Suspensions

20-30 FITTING

A-3150196
31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

20-30 STRENGTHENING
RING SILICONE

A-0101084
01.01.084S

The 20-30 Strengthening Ring is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

20-30 CONNECTION PLATE

A-3150141
31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

20-30 LOCKING SPACER

A-3150140
31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

F40 Cups

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F40-NEO
(Nitrile)
A-3150129P
31.50.129P
F40-2.30

1.66
(42.1)

0.50
(13.0)

4.89
(2.22)

11.00
(4.99)

ANVER SLSA-2 Level Compensator Suspensions

F40-SIT
(Translucent Silicone)
A-3150129S
31.50.129S
F40-2.20

1.66
(42.1)

0.50
(13.0)

4.89
(2.22)

11.00
(4.99)

A-F40-P60
(Thermo-elastic
Polyurethane)

1.66
(42.1)

0.50
(13.0)

4.89
(2.22)

11.00
(4.99)

A-F40-P30
(Thermo-elastic
Polyurethane)**

1.66
(42.1)

0.50
(13.0)

4.89
(2.22)

11.00
(4.99)

A-F40-P50
(Thermo-elastic
Polyurethane)**

1.66
(42.1)

0.50
(13.0)

4.89
(2.22)

11.00
(4.99)

F40 Cups with 40/30-2/BL30 Fitting

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F40-NEO/1PC FITTING
(Nitrile)
A-3150018PA
31.50.018PA
F40-2.30.04AA

1.66
(42.1)

0.80
(21.0)

4.89
(2.22)

11.00
(4.99)

F40-SIT/1PC FITTING
(Translucent Silicone)
A-3150018SA
31.50.018SA
F40-2.20.04AA

1.66
(42.1)

0.80
(21.0)

4.89
(2.22)

11.00
(4.99)

F40 Cups with 40 Connection Plate

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F40-NEO/FIT/SCREEN
(Nitrile)
A-3150018P
31.50.018P
F40-2.30-04AG

1.66
(42.1)

0.90
(22.0)

4.89
(2.22)

11.00
(4.99)

F40-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150018S
31.50.018S
F40-2.20-04AG

1.66
(42.1)

0.90
(22.0)

4.89
(2.22)

11.00
(4.99)

Fitting for F40 Cups

Notes

Suspensions

40/30-2/BL30 FITTING

A-3250001
32.50.001
04AG

The 40/30-2/BL30 FITTING uses a Strengthening Ring 40. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" NPS Thread.

STRENGTHENING
RING SILICONE 40

A-0101085
01.01.085S

The Strengthening Ring 40 is used with the above 40/30-2/BL30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

40 CONNECTION PLATE

A-3150143
31.50.143

The 40 Connection Plate uses a 40 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" Thread.

40 LOCKING SPACER

A-3150142
31.50.142

The 40 Locking Spacer is used with the above 40 Connection Plate. It presses in from the bottom.

F50 Cups

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F50-NEO
(Nitrile)
A-3150130P
31.50.130P
F50-2.30

2.10
(52.8)

0.70
(17.5)

9.33
(4.23)

21.00
(9.53)

F50-SIT
(Translucent Silicone)
A-3150130S
31.50.130S
F50-2.20

2.10
(52.8)

0.70
(17.5)

9.33
(4.23)

21.00
(9.53)

A-F50-P60
(Thermo-elastic
Polyurethane)

2.10
(52.8)

0.70
(17.5)

9.33
(4.23)

21.00
(9.53)

A-F50-P30
(Thermo-elastic
Polyurethane)**

2.10
(52.8)

0.70
(17.5)

9.33
(4.23)

21.00
(9.53)

A-F50-P50
(Thermo-elastic
Polyurethane)**

2.10
(52.8)

0.70
(17.5)

9.33
(4.23)

21.00
(9.53)

F50 Cups with 50 Fitting

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F50-NEO/1PC FITTING
(Nitrile)
A-3150019PA
31.50.019PA
F50-2.30.05AG

2.10
(52.8)

1.10
(27.0)

9.33
(4.23)

21.00
(9.53)

F50-SIT/1PC FITTING
(Translucent Silicone)
A-3150019SA
31.50.019SA
F50-2.20.05AG

2.10
(52.8)

1.10
(27.0)

9.33
(4.23)

21.00
(9.53)

F50 Cups with 50 Connection Plate

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F50-NEO/FIT/SCREEN
(Nitrile)
A-3150019P
31.50.019P

2.10
(52.8)

1.00
(26.0)

9.33
(4.23)

21.00
(9.53)

F50-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150019S
31.50.019S

2.10
(52.8)

1.00
(26.0)

9.33
(4.23)

21.00
(9.53)

Fitting for F50 Cups

Notes

Suspensions

50/50-2 FITTING
A-05AG
05AG
(Replaces
A-3250002)
32.50.002

The 50/50-2 Fitting is utilized with a Strengthening Ring 50. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" Thread.

STRENGTHENING
RING SILICONE 50

A-0101086
01.01.086S

The Strengthening Ring 50 is used with the above 50/50-2 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

50 CONNECTION PLATE

A-3150145
31.50.145

The 50 Connection Plate uses a 50 Locking Spacer. It allows you to screw directly into any of the SLSA-2 Suspensions which have a male G 1/8" Thread.

50 LOCKING SPACER

A-3150144
31.50.144

The 50 Locking Spacer is used with the above 50 Connection Plate. It presses in from the bottom.

F75 Cups

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F75-NEO
(Nitrile)
A-3150131P
F75.30W

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

F75-SIT
(Translucent Silicone)
A-3150131S
F75.20.W

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

A-F75-P50
(Urethane 50)

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

A-F75-P60
(Urethane 60)

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

A-F75-NM
(Nomathane)

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

F75 Cups with 75 Connection Plate

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F75-NEO/CON PLATE
(Nitrile)
A-3150037P
31.50.037P

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

F75-SIT/CON PLATE
(Translucent Silicone)
A-3150037S
31.50.037S

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

A-F75-P50/CON PLATE
(Urethane 50)
A-F75-P50-W

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

A-F75-P60/CON PLATE
(Urethane 60)
A-F75-P60-W

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

A-F75-NM-W
(Nomathane)

3.02
(76.5)

0.60
(14.0)

26.67
(12.10)

60.00
(27.22)

F75 Cups with 75 Fitting

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F75-NEO/FIT/SCREEN 1/8
(Nitrile)
A-3250032P
32.50.032P
F75.30.07UA

3.02
(76.5)

0.80
(20.0)

26.67
(12.10)

60.00
(27.22)

F75-SIT/FIT/SCREEN 1/8
(Translucent Silicone)
A-3250032S
32.50.032S
F75.20.07UA

3.03
(77.0)

0.80
(20.0)

26.67
(12.10)

60.00
(27.22)

A-F75-P50/FIT/SCREEN 1/8
(Urethane 50)
A-F75-P50-FIT

3.03
(77.0)

0.80
(20.0)

26.67
(12.10)

60.00
(27.22)

A-F75-P60/FIT/SCREEN 1/8
(Urethane 60)
A-F75-P60-FIT

3.03
(77.0)

0.80
(20.0)

26.67
(12.10)

60.00
(27.22)

A-F75-NM-FIT
(Nomathane)

3.03
(77.0)

0.80
(20.0)

26.67
(12.10)

60.00
(27.22)

Fitting for F75 Cups

Notes

Suspensions

75 CONNECTION PLATE 1/8

A-3150043
31.50.043

The 75 Connection Plate 1/8 is to be imbedded in the 75 Series suction cup's rubber portion allowing the 75 Fitting 1/8" to be held in place.

75 FITTING 1/8"

A-3250006
32.50.006
07UA

The 75 Fitting 1/8" with 1/8" female center port connection with optional M5 (10/32) female port often used as a blow-off port.

F110 Cups

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F110-NEO
(Nitrile)
A-3150132P
F110.30.W

4.30
(112.5)

0.70
(19.0)

56.00
(25.40)

126.00
(57.15)

ANVER SLSA-3 Level Compensator Suspensions

F110-SIT
(Translucent Silicone)
A-3150132S
F110.20.W

4.30
(112.5)

0.70
(19.0)

56.00
(25.40)

126.00
(57.15)

A-F110-P50
(Urethane 50)

4.30
(112.5)

0.70
(19.0)

56.00
(25.40)

126.00
(57.15)

A-F110-P60
(Urethane 60)

4.30
(112.5)

0.70
(19.0)

56.00
(25.40)

126.00
(57.15)

F110 Cups with 110 Connection Plate

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F110-NEO/CON PLATE
(Nitrile)
A-3150038P
31.50.038P

4.30
(112.5)

0.70
(19.0)

56.00
(25.40)

126.00
(57.15)

F110-SIT/CON PLATE
(Translucent Silicone)
A-3150038S
31.50.038S

4.30
(112.5)

0.70
(19.0)

56.00
(25.40)

126.00
(57.15)

A-F110-P50/CON PLATE
(Urethane 50)
A-F110-P50-W

4.30
(112.5)

0.70
(19.0)

56.00
(25.40)

126.00
(57.15)

A-F110-P60/CON PLATE
(Urethane 60)
A-F110-P60-W

4.30
(112.5)

0.70
(19.0)

56.00
(25.40)

126.00
(57.15)

F110 Cups with 110 Fitting

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F110-NEO/FIT/SCREEN
(Nitrile)
A-3150021P
31.50.021P
F110.30.11UA

4.30
(112.5)

1.00
(26.0)

56.00
(25.40)

126.00
(57.15)

F110-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150021S
31.50.021S
F110.20.11UA

4.30
(112.5)

1.00
(26.0)

56.00
(25.40)

126.00
(57.15)

F110-P50/FIT/SCREEN
(Urethane 50)
A-F110-P50-FIT

4.30
(112.5)

1.00
(26.0)

56.00
(25.40)

126.00
(57.15)

F110-P60/FIT/SCREEN
(Urethane 60)
A-F110-P60-FIT

4.30
(112.5)

1.00
(26.0)

56.00
(25.40)

126.00
(57.15)

Fittings for F110 Cups

Notes

Suspensions

110 FITTING 1/2"

A-3250007
32.50.007
11UA

The 110 Fitting 1/2" with 1/2" female center port connection with optional NPSF 1/8" female port often used as a blow-off port.

110 CONNECTION PLATE

A-3150044
31.50.044

The 110 Connection Plate is to be imbedded in the 110 Series suction cup's rubber portion allowing the 110 Fitting 1/2" to be held in place.

F150 Cups

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F150-NEO
(Nitrile)
A-3150133P
F150.30.W

6.13
(155.6)

1.00
(25.0)

106.67
(48.38)

240.00
(108.86)

F150-SIT
(Translucent Silicone)
A-3150133S
F150.20.W

6.13
(155.6)

1.00
(25.0)

106.67
(48.38)

240.00
(108.86)

F150-P50
(Urethane 50)
A-F150-P50

6.13
(155.6)

1.00
(25.0)

106.67
(48.38)

240.00
(108.86)

F150-P60
(Urethane 60)
A-F150-P60

6.13
(155.6)

1.00
(25.0)

106.67
(48.38)

240.00
(108.86)

F150 Cups with 150 Connection Plate

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F150-NEO/CON PLATE
(Nitrile)
A-3150039P
31.50.039P

6.13
(155.6)

1.00
(25.0)

106.67
(48.38)

240.00
(108.86)

F150-SIT/CON PLATE
(Translucent Silicone)
A-3150039S
31.50.039S

6.13
(155.6)

1.00
(25.0)

106.67
(48.38)

240.00
(108.86)

F150-P50/CON PLATE
(Urethane 50)
A-F150-P50-W

6.13
(155.6)

1.00
(25.0)

106.67
(48.38)

240.00
(108.86)

F150-P60/CON PLATE
(Urethane 60)
A-F150-P60-W

6.13
(155.6)

1.00
(25.0)

106.67
(48.38)

240.00
(108.86)

F150 Cups with 150 Fitting

Static Diameter

Static Height

Load Capacity

Pull-Off Capacity

Suspensions

F150-NEO/FIT/SCREEN
(Nitrile)
A-3150022P
31.50.022P
F150.30.15UA

6.13
(155.6)

1.30
(32.0)

106.67
(48.38)

240.00
(108.86)

F150-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150022S
31.50.022S
F150.20.15UA

6.13
(155.6)

1.30
(32.0)

106.67
(48.38)

240.00
(108.86)

F150-P50/FIT/SCREEN
(Urethane 50)
A-F150-P50-FIT

6.13
(155.6)

1.30
(32.0)

106.67
(48.38)

240.00
(108.86)

F150-P60/FIT/SCREEN
(Urethane 60)
A-F150-P60-FIT

6.13
(155.6)

1.30
(32.0)

106.67
(48.38)

240.00
(108.86)

Fittings for F150 Cups

Notes

Suspensions

150 CONNECTION PLATE

A-3150045
31.50.045

The 150 Connection Plate is to be imbedded in the 150 Series suction cup's rubber portion allowing the 150 Fitting 1/2" to be held in place.

150 FITTING 1/2"

A-3250008
32.50.008

The 150 Fitting 1/2" with 1/2" female center port connection with optional NPSF 1/8" female port often used as a blow-off port.

* All cups shown above are identical in size and shape to P-Brand's cups. The dimensional drawings represent the cup dimensions without a load as given by P-Brand.
** These are special cups that may require minimum purchase (contact Anver Sales for additional information).

The "G" thread is also known as BSPP, commonly used world-wide for Vacuum Applications.


More Product Information
Flat Vacuum Cups with Valves

Go to Suction Cup Main Page

ANVER Corp., 36 Parmenter Rd, Hudson, MA 01749 USA - Tel: 800-654-3500 - +1-978-568-0221 - Fax: +1-978-568-1570
Home: www.anver.com	email:	Copyright © ANVER Corp. 2012	Terms of use