| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
View Printer-Friendly PDF Page|
|
ANVER Bolt-On Vacuum Pads feature heavy-duty steel construction with replaceable rubber seals. Excellent for handling semi-rigid to very rigid loads such as metal sheet or plate, these versatile vacuum pads have become an industry standard. A variety of mounting styles make these pads perfect for a wide range of vacuum lifting applications. Features:
Note: ANVER reserves the right to supply these pads with either painted or plated steel parts. Consult factory for more information. |
|
|
|
Specifications for VP Series Vacuum Pads:
 |
Product Photo |
Pad Number (Material) [Drawing No.] |
Replacement Seal Number |
Internal Seal Number |
A Pad Dia. in. (mm) |
Mounting Bolt Pattern L X W in. (mm) |
C in. (mm) |
D in. (mm) |
Vacuum Port NPT |
Vacuum Port Location |
Weight lb (kg) |
*Rated
Load lb (kg) |
 |
VP145Q (Nitrile) [76200871] |
SR-145DP** | SE-145 | 14.50 (368) |
6.5
X 4.0 (165 X 102) |
0.81 (21) |
2.94 (75) |
1/2" | Position E | 29 (13) |
750 (341) |
|
| SR-145M** | Not Needed with SR-145M |
14.50 (368) |
6.5
X 4.0 (165 X 102) |
0.46 (12) |
2.46 (62) |
1/2" | Position E | 29 (13) |
750 (341) |
|||
 |
VP155Q (Nitrile) [76200846] |
SR-155DP | SE-155 | 17.25 (438) |
6.5
X 4.0 (165 X 102) |
0.81 (21) |
2.44 (62) |
1/2" | Position F | 38 (17) |
1000 (455) |
|
 |
VP185Q (Nitrile) [76200847] |
SR-185DP | SE-185 | 18.50 (470) |
8.0
X 6.0 (203 X 152) |
0.81 (21) |
2.44 (62) |
1/2" | Position F | 45 (20) |
1300 (591) |
|
 |
VP195Q (Nitrile) [76200827] |
SR-195DP** | SE-195 | 19.50 (495) |
8.0
X 6.0 (203 X 152) |
0.81 (21) |
2.44 (62) |
1/2" | Position F | 50 (23) |
1550 (705) |
|
| VP195MQ (Nitrile) |
SR-195M** | Not Needed with SE-195M |
19.50 (495) |
8.0
X 6.0 (203 X 152) |
0.81 (21) |
2.44 (62) |
1/2" | Position F | 50 (23) |
1550 (705) |
||
 |
VP215Q (Nitrile) [76200035] |
SR-215DP** | SE-215 | 22.00 (559) |
8.0
X 6.0 (203 X 152) |
1.06 (27) |
2.69 (68) |
3/4" |
Position E | 58 (26) |
2000 (909) |
|
| VP215MQ (Nitrile) |
SR-215M** | Not Needed with SE-215M |
22.00 (559) |
8.0
X 6.0 (203 X 152) |
1.06 (27) |
2.69 (68) |
3/4" |
Position E | 58 (26) |
2000 (909) |
||
 |
VP235Q (Nitrile) [76200034] |
SR-235DP** | SE-235 | 24.00 (610) |
8.0
X 6.0 (203 X 152) |
1.16 (29) |
2.66 (68) |
3/4" | Position F | 66 (30) |
2300 (1045) |
|
| VP235MQ (Nitrile) [76200037] |
SR-235M** | Not Needed with SE-235M |
24.00 (610) |
8.0
X 6.0 (203 X 152) |
0.71 (18) |
2.21 (56) |
3/4" | Position F | 66 (30) |
2300 (1045) |
*Note: Rated load capacity at 24" Hg vacuum when used in the horizontal plane, and based on a safety factor of 2. Divide again by 2 for vertical applications. Actual capacity depends on load surface and condition of the vacuum generating system, and must be determined by the user.
** Note: Replacement M-Series seals do not require an internal seal. When replacing M-Series seals on a lifter, all seals must be replaced with matching seals.
|
|
Note: ANVER reserves the right to supply these pads with either painted or plated steel parts. Consult factory for more information.
 |
 |
| ||||||||