|
 Vacuum
Cups and Suction Cups
OctopusGrip™ Rectangular Vacuum Cups
View Printer-Friendly PDF Page
|
 |
These
rectangular vacuum cups with
fully encased metal hub and multiple rounded cleats, are designed as a General Purpose
Vacuum
Pad for lifting a multitude of Porous, Semi-Porous and Non-Porous Loads. They are excellent for wood,
composites, stone and other materials. They feature an
excellent, versatile design for many applications. Features:
-
Vacuum
Hub is a machined metal plate fully encased in an OctopusGrip™
proprietary
urethane cup. There is no leakage as all mounting holes are sealed on
the bottom.
-
Vacuum Cup is supplied with
pre-drilled and tapped mounting holes and a vacuum port. No drilling
is required.
-
The standard material is
ANVER's OctopusGrip™
Polyurethane (PUR) is extremely long wearing, non-marring and
abrasion-resistant.
-
For more information on the
materials, Click Here.
|
Specifications for
OctopusGripTM Cups:
OTG075090Q-UR |
OTG070130Q-UR |
|
Product Photo
(Click to
Enlarge)
|
Cup No.
and Material |
A
in.
(mm)
|
B
in.
(mm)
|
D
in.
(mm)
|
E
in.
(mm)
|
F
Bolt
Circle
in.
(mm)
|
H
in.
(mm)
|
Rated
Load*
(Vertical)
lb
(kg)
|
Rated
Load*
(Horizontal)
lb
(kg) |
|
|
 |
OTG075090Q-UR
(Polyurethane) |
9.00
(228) |
7.50
(190) |
- |
- |
4.50
(114) |
0.63
(16) |
175
(79) |
350
(160) |
|
|
 |
OTG070130Q-UR
(Polyurethane)
|
13.00
(330)
|
7.00
(178)
|
2.68
(68)
|
6.47
(164)
|
- |
0.75
(20)
|
250
(113)
|
500
(227)
|
Vacuum Lifting System
Pad Attachments
FlexGrip Series
For Lifting CRT Monitors and Other
Curved and Cylindrical Objects
View Printer-Friendly PDF Page
|
|
The FlexGrip Series
Vacuum Pad Attachment, a new concept in vacuum pad engineering designed to make
the lifting of CRT Monitors, and other similar, slightly curved and cylindrical
objects easy and safe, is now available from ANVER.
The FlexGrip, which is suitable as a single pad for the VT160 and smaller Vacuum
Tube Lifting Systems, has a spring steel skeleton molded inside its urethane
body, which is pre-formed to the smallest curvature of your application (load),
but will flatten out to accommodate larger curves, or even conform to a flat
surface. When released, it springs back to its pre-formed curved shape.
The pad shown here is molded from 35 durometer urethane, but can be made in 20,
40, 50 or 60 durometer, as well, according to the demands of your application.
Contact an ANVER Application Engineer to find out how the FlexGrip can simplify
your lifting application today!
|
FlexGrip Series Vacuum
Pad Attachment:
|
|
Product
Photo
(Click to Enlarge) |
Attachment
Model No.
and Material |
Quick
Disconnects |
FlexGrip Series Vacuum Pads are
Custom Engineered
to meet the needs of your particular application.
Please call factory
for details. |
|
 |
T1-FG65S20-U35
(Polyurethane) |
 |
* The
cup capacities shown above are based on 24"Hg at sea level with a safety factor
of two (2) in the horizontal (flat), and four (4) in the vertical (upright).
Rated Load Capacities
are estimated; actual capacity will vary based on the load surface and the level
of vacuum.
|
