ANVER Vacuum Pads for Vacuum LiftersVacuum Lifting System Pads
Small Foam Seal Vacuum Pads for Uneven and Rough Loads

PDF for Round Vacuum Pads with Adhesive Foam Seals View Printer-Friendly PDF Page

This assembly comes with a double female NPT 1/8" or G 1/8" coupling. This makes it ready to screw into our 1/8" suspensions. You can also take this adaptor coupling off, and use the male fitting which protrudes from the cup.

Material: Black Delrin

Specifications for Small Foam Seal Vacuum Pads for Uneven and Rough Loads:
H1 Style
for Uneven Loads

H5 Style
for Rough Loads

 

Product Photo
(Click to
Enlarge)		 Part Number Fitting *Rated Load
(Horizontal)
lb
(kg)		 *Rated Load
(Vertical)
lb
(kg)		  Weight
oz.
(g)		 Replacement
Sealing
Ring P/N		 Fitting
Group
(Click Image for
More Info)		 Level
Compensator
Suspension
 (Click Image for
More Info)
FP38-HS18-H1 NPT 1/8" 35
(15.9)		 17.5
(7.9)		 6.2
(176)		 FR-H1 SLSA-2 Suspensions
FP38-HS18G-H1 G 1/8" 35
(15.9)		 17.5
(7.9)		 6.2
(176)		 FR-H1 SLSA-2 Suspensions
FP38-HS18-H5 NPT 1/8" 35
(15.9)		 17.5
(7.9)		 6.2
(176)		 FR-H5 SLSA-2 Suspensions
FP38-HS18G-H5 G 1/8" 35
(15.9)		 17.5
(7.9)		 6.2
(176)		 FR-H5 SLSA-2 Suspensions
 
* Rated load capacity at 22 in. Hg vacuum, when used in the horizontal plane, and based on a safety factor of 2.
  Divide again by 2 for vertical application. Actual capacity depends on load surface, and condition of the vacuum
  generating system, and must be determined by the user.

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570
Home: www.anver.com    email:

Copyright © ANVER Corp. 2009

Terms of use