|
| Pad Number (Material) [Drawing No.] |
Replacement Seal Number |
Internal Seal Number |
A Pad Dia. in. (mm) |
Mounting Bolt Pattern L X W in. (mm) |
C in. (mm) |
D in. (mm) |
Vacuum Port NPT |
Vacuum Port Location |
Weight lb (kg) |
*Rated
Load lb (kg) |
|
VP235Q (Nitrile) [76200034] |
SR-235DP** | SE-235 | 24.00 (610) |
8.0
X 6.0 (203 X 152) |
1.16 (29) |
2.66 (68) |
3/4" | Position F | 66 (30) |
2300 (1045) |
| SR-235M** | Not Needed with SE-235M |
24.00 (610) |
8.0
X 6.0 (203 X 152) |
0.71 (18) |
2.21 (56) |
3/4" | Position F | 66 (30) |
2300 (1045) |
*Note: Rated load capacity at 24" Hg vacuum when used in the horizontal plane, and based on a safety factor of 2. Divide again by 2 for vertical applications. Actual capacity depends on load surface and condition of the vacuum generating system, and must be determined by the user.
** Note: Replacement seal SR-145M does not require an internal seal. When replacing seals for VP145Q Pads on a lifter, all seals must be replaced with matching seals.
|
|
 |
 |
| ||||||||