Vacuum Filters
Plastic In-Line Type
FLTP Series

These are absolutely great vacuum filters for use with vacuum pumps and vacuum systems. They are 100% airtight, even after repeated element changes; you can easily see when the element needs changing; they do not corrode or rust; and the element works well even on fine dust.

These filters are used to protect valves, pumps, ejectors, etc., from dust and other harmful particles. In-line filters are designed to be serviced without removing the entire unit from the line.

You can simply remove the bowl by hand and clean or change the filter element. The transparent polycarbonate bowl allows you to easily monitor the filter condition.

ANVER vacuum filters range in size from 1/4" to 1-1/2" NPT and are constructed from FDA approved black nylon. If space permits, use of the longer size bowl will require fewer element changes.

Vacuum Filters are designed for years of reliable, leak-proof use:

• FDA approved Black Nylon Body is corrosion and rust proof, and shock-proof
• Buna-N Gasket seals the bowl to the housing
• 70-140 micron polyethylene filter element
• Transparent polycarbonate bowl shows condition of filter
• Pressure rating from full vacuum to 150 psi

• Maximum temperature 125° F (52° C) at 100 psi

ANVER
Part No.

A
in.
(mm)

B
in.
(mm)

C
in.
(mm)

D
in.
(mm)

Filter
area
in.²
(cm²)

Pipe Thread
(NPT)

FLTP-1/8F

3.1
(78.7)

2.4
(61)

1.9
(48.3)

2.0
(50.8)

4.27
(28)

1/8"
NPT Female

FLTP-1/4M

3.1
(78.7)

2.4
(61)

1.9
(48.3)

2.0
(50.8)

4.27
(28)

1/4"
NPT Male

FLTP-1/4F

3.1
(78.7)

2.4
(61)

1.9
(48.3)

2.0
(50.8)

4.27
(28)

1/4"
NPT Female

FLTP-3/8M

3.1
(78.7)

2.4
(61)

1.9
(48.3)

2.0
(50.8)

4.27
(28)

3/8"
NPT Male

FLTP-3/8FS

3.1
(78.7)

2.4
(61)

1.9
(48.3)

2.0
(50.8)

4.27
(28)

3/8"
NPT Female

FLTP-3/8F

3.6
(91.4)

5.1
(129.5)

2.9
(73.6)

4.4
(111.8)

19
(123)

3/8"
NPT Female

FLTP-1/2F

3.6
(91.4)

5.1
(129.5)

2.9
(73.6)

4.4
(111.8)

19
(123)

1/2"
NPT Female

FLTP-3/4F

3.6
(91.4)

5.4
(137.2)

2.9
(73.6)

4.6
(116.9)

19
(123)

3/4"
NPT Female

FLTP-1F

4.9
(124.5)

6.4
(162.6)

4.0
(101.6)

5.6
(142.2)

33
(213)

1"
NPT Female

FLTP-1.5F/15

5.2
(132.1)

8.1
(209.9)

4.0
(101.6)

6.9
(175.3)

39
(252)

1-1/2"
NPT Female

Replacement of Filter Elements takes only a few seconds.
All filter elements can be easily cleaned or replaced by hand without removing the entire filter from the line by simply removing the filter bowl. Simply unscrew the bowl by hand. No tools are needed.

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570

Copyright © ANVER Corp. 2009

Terms of use