Vacuum Generators and Vacuum Stations
Self-Contained Electric Vacuum Stations
VPE3 Series with ANVER VacGuard II™ Vacuum Control System

Safety Features:

• VacGuard II Vacuum Control System
  This revolutionary solid-state Vacuum Control System combines all the required vacuum generator controls in a rugged, compact polycarbonate enclosure. The VacGuard II controls all vacuum pump functions, safety lights and is fitted with a standard audible vacuum leakage warning system.

• Front Control Panel and Gauges
  All gauges, lights and power switches are mounted on the front of the control panel. The two vacuum gauges on the face of the panel display the level of vacuum in the manifold and in the reservoir. The control pendant clip mounts to the front handle on a 10 ft. coiled cord and provides rapid attach and release functions at the operator’s fingertips.

• Indicator Lights
  Green light indicates, “safe” vacuum level.
  Red light indicates, “unsafe” vacuum level.

• Vacuum Retention
  The system includes an internal check valve to stop loss of vacuum in the event of a power failure (non-porous loads). An 822 cu. in. vacuum reservoir assists in maintaining a safe vacuum level during a power failure (non-porous loads).

• Thermal Overload Protection
  Heat damage is prevented by a thermal sensor that shuts off the motor if the motor temperature exceeds safe limits.

• Ergonomic Adjustable Front Handlebar
  Easy to grasp, large loop handlebar enables the operator to easily and safely maneuver the attached load without touching the load itself. Handlebar can be adjusted for smaller size loads.

• Twist-Lock Power Cord Connectors
  The Twist-lock receptacles, both the male and female are supplied, which helps prevent accidental disconnection from the power source.

• Audible Vacuum Leakage Warning System (VLS-03E - Standard)
  Integrated electronically controlled vacuum leakage sensor monitors vacuum level and will sound an alarm if a slow vacuum leak is present when the vacuum level drops to a pre-determined set point.

Maintenance:

• Bottom Hinged Front and Back Covers
  Both the front and back covers fold open for easy access to all components.

• Air Filter, 2 Places
  Located on the front and at the rear of the unit, the filter covers are clear for quick inspection and screw off for easy cleaning. [Oversized air filter provided inside of front cover features a screw-on clear filter bowl for easy filter cleaning.

Specifications:

• Light Duty Frame
  Rated for 2200 lb (997.9 kg) and is designed for mounting on a 3” x 3” beam.

• Standard Duty Frame
  Rated for 6900 lb (3130 kg) and is designed for mounting on a 3” x 6” beam.

• Heavy-Duty Frame
  Rated for 8000 lb (3629 kg), designed for a 5” x 7” or 6” x 8” beam.

• Remote Mount Frame (no lift bale)
  Includes 14” x 8” mounting pattern for 3/8-16 hardware.

Vacuum Pump*:

• 3/4 hp oil-less motor is thermally overload protected and requires 115V/1ph/60Hz 15 amp service.

• Operating Temperature: [32°F to 104°F (0°C to 40°C)] 35°F to 135°F (1.7°C to 57.2°C)

Options:

• Optional Moisture Traps (WT-VP3-[Series])
  For damp applications: prevents saturation of filter and possible damage to pump. Not for handling wet loads.

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570

Copyright © ANVER Corp. 2009

Terms of use