 |
|
|
|
|
|
|
ANVER's PHC Series Air Powered Hand Vacuum Cups were designed for the horizontal setting of tiles in the stone industry. They make it possible for you to position loads without pinching your fingers or damaging the load edges. These hand cups make such simple work of laying stone tiles, they have become one of the required tools of the trade.
|
Unique Design Features:
These hand cups feature virtually instantaneous attach and release. Release requires simply plugging the small exhaust port with your fingertip. There are no moving parts to wear out so it will hold up to the rugged uses typical in the stone industry.
Specifications:
|
Order Online |
Product Photo |
Item No. |
Description |
Diameter |
Carrying
Capacity |
Weight |
|
|
 |
PHC57 | Powered
Vacuum Hand Cup with
VC57 Suction Cup Typical set-up shown. Slide valve and air hose are not included. |
5.63 (143) |
38
lb (17 kg) [4 to 1] |
2.5 (1.1) |
 $149.95 |
 |
PHC65 | Powered
Vacuum Hand Cup with
VC65 Suction Cup Typical set-up shown. Slide valve and air hose are not included. |
6.63 (168) |
50
lb (23 kg) [4 to 1] |
2.7 (1.2) |
|
|
 |
PHC75 | Powered
Vacuum Hand Cup with
VC75 Suction Cup Typical set-up shown. Slide valve and air hose are not included. |
7.50 (191) |
75
lb (34 kg) [4 to 1] |
3.4 (1.5) |
|
|
 |
PHC95 | Powered Vacuum Hand Cup with VC95 Suction Cup | 10.0 (254) |
125
lb (56 kg) [4 to 1] |
5.2 (2.4) |
Note: These powered hand cups are made to order. Please allow 7 business days for production before they can be shipped.
Caution: These suction hand cups are only designed for momentary hand use on small or awkward loads without other natural handles, such as stone tiles and bricks. Their indicated carrying capacities are for handling clean, dry, smooth, non to semi-porous surfaces at sea level with undamaged seals, properly used. We state their carrying capacity conservatively, with a 4 to 1 vacuum safety factor when correctly attached. We recommend not exceeding this, as our carrying capacities are realistic in real world conditions.
We recently revised our capacities down, but we feel you will find our more conservative ratings are accurate for what is safe in most applications. Along with actual load testing, vacuum hand cup capacities are calculated by a formula based on determining the surface area (cup diameter) under a fixed vacuum level and then dividing by a factor for safety. If you see a competitive cup of the same size with more capacity, it is just that the competitive cup has a lower safety factor.
Note: The PHC Series of vacuum hand cups are only designed for momentary hand use in the handling of small loads in the stone and wood industry. They do not have a check valve or reservoir to hold the load in case of power failure. They are designed for hand use only, and are totally unsuitable and unsafe for attachment to hoists, manipulators, forklifts or for use with any other lifting method or device. For such applications, please see our information on Powered Vacuum Lifters and Vacuum Tube Lifting Systems.
Click
here to view or download a copy of "How to Safely Use ANVER Hand
Cups" in PDF format
| The minimum hand cup order amount for all shipments destined for Canada, Mexico and the United States (including, Hawaii, Alaska and Puerto Rico) is $39.00. The hand cup sales order minimum for all other export destinations is $300.00. Your credit card will not be charged until the product is shipped. |
| ||||||||
View Printer-Friendly PDF Page