 |
|
|
|
|
 |
These simple, hand-operated vacuum cups and suction cups are well suited for handling non-porous sheet and plate materials in the horizontal position. This is an old proven design used primarily for light sheet products. A typical application would be lifting light sheet from a skid to a table for example. Creates less vacuum than other hand cups such as the lever or pump action styles. Not suitable for vertical handling. Features:
|
|
Single Hand Suction Cup and Finger Suction Cups
|
|
Order Online |
Product Photo (Click to Enlarge) |
Item No. |
Carrying Capacity at a 4 to 1 Safety Factor lb (kg) |
Description |
|
|
 |
HC-57 | 1.75 lb (0.75 kg) [4 to 1] |
Suction Hand Cup, Single 2.25"
- One Finger -
Top Seller! |
|
|
 |
A1859 | 12 lb (5 kg) [4 to 1] |
Suction Hand Cup, Single 4" Cup |
|
|
 |
A3825 | 3 lb (1.3 kg) [4 to 1] |
Suction Hand Cup, Single 3-1/4" Cup - Two Finger |
 $2.99 |
 |
HC-77 |
3 lb (1.3 kg) [4 to 1] |
Suction Hand Cup, Single 3.25" (83mm) - All Rubber - Top Seller! |
|
|
 |
A4875 | 3.75
lb (1.75 kg) [4 to 1] |
Suction Hand Cup, Single 4-5/8" Cup - Two Finger |
|
Safety regulations require punch press operators to use a hand tool when feeding or removing work from the die. Punch press hand suction cup feeders are manufactured of strengthened steel rods and oil resistant, flexible rubber compound vacuum cups. Ideal for handling plastic, metal, glass, and all materials with a smooth, flat, non-porous surface. |
|
Order |
Product Photo (Click to Enlarge) |
Item No. | Carrying Capacity at a 4 to 1 Safety Factor lb (kg) |
Description |
|
|
 |
A6461 | 4
lb (1.75 kg) [4 to 1] |
Suction Hand Cup, Double 2-1/8" Suction Cups with 12" Handle |
|
|
 |
A6464 | 1.75
lb (.75 kg) [4 to 1] |
Suction Hand Cup, Single 2-1/8" Suction Cup with 12" Handle |
|
|
 |
A6466 | 1.75 lb (.75 kg) [4 to 1] |
Suction Hand Cup, Single 2-1/8" Suction Cup with 18" Handle |
|
|
 |
A6472 | 5 lb (2 kg) [4 to 1] |
Suction Hand Cup, Single 4" Suction Cup with 18" Handle |
Replacement Parts for Suction Hand Cups
Replacement parts are available to maintain the hand vacuum cups in perfect condition for years of service.
|
Order Online |
Product
Photo (Click to Enlarge) |
Item No. |
Description |
|
|
 |
A2292 |
Suction Hand Cup, Spare 3" Suction Cup with 5/8"-18 Male Extension |
Caution: These suction hand cups are only designed for momentary hand use on small or awkward loads without other natural handles. Their indicated carrying capacities are for handling clean, dry, smooth, non-porous surfaces at sea level with clean, dry, undamaged seals, properly used. We state their carrying capacity conservatively with a 4 to 1 vacuum safety factor when correctly attached. We recommend not exceeding this as our carrying capacities are realistic in real world conditions.
We recently revised our capacities down but we feel you will find our more conservative ratings are accurate for what is safe in most applications. Along with actual load testing, vacuum hand cup capacities are calculated by a formula based on determining the surface area (cup diameter) under a fixed vacuum level and then dividing by a factor for safety. If you see a competitive cup of the same size with more capacity, it is simply that the competitive cup has a lower safety factor.
These hand cups are totally unsuitable and unsafe for attachment to hoists, manipulators, fork-lifts or for use with any other lifting method or device. For such applications, please see our information on our Powered Vacuum Lifters and Vacuum Tube Lifting Systems.
Click
here to view or download a copy of "How to Safely Use ANVER Hand
Cups" in PDF format
| The minimum hand cup order amount for all shipments destined for Canada, Mexico and the United States (including, Hawaii, Alaska and Puerto Rico) is $39.00. The hand cup sales order minimum for all other export destinations is $300.00. Your credit card will not be charged until the product is shipped. |
| ||||||||
