Anver Bottling Equipment, Bottling End Effectors, Vacuum End EffectorsInflatable Rubber Pneumatic Powered Picker End-Effectors
Rubber Bladder Expands to Hold Load for Lifting
Compressed Air Powered Inflatable Rubber Bladder tightly grips the load from
the inside when pressurized
 

Rubber Bladder Expands to Hold Load for Lifting

Features:

  • A Brand New Product to grip and lift opened mouth containers quickly and efficiently.
  • A rubber bladder inflates to 140% of size to firmly grip loads from the inside.
  • Rubber attachment is delicate, non-marring and conforms to any shape.
  • Has good load capacity and is unaffected by dusty environments.
  • Requires just a small amount of air pressure (10-15+ PSI) to expand and attach. To release simply reverse the air flow.  As the system is sealed it only requires pressure with no loss of flow to operate.  Attach and release are instantaneous, designed for high speed production machinery.  Economical, requires no lubrication.
  • Units are rebuildable in the field simply by replacing the rubber bladder, which slips on and is locked down by a screw collar.

 

NOTE: Pickers on this page with the suffix -PU are constructed
from Polyurethane Rubber, which is Fully Washable.

Product Photo
(Click to Enlarge)

Picker
Part No.

Resting
insertion
D Dia.
in.
(mm)

Maximum
Inflatable
D1 Dia.
in.
(mm)

 Overall
d Dia.
in.
(mm)

d1
Connection
Thread
Size

Overall
H height
in.
(mm)

Rubber
Gripper
h height
in.
(mm)

IP1751G18

0.67
(17)

0.99
(25)

0.73
(18.5)

G 1/8"

4.02
(102)

2.01
(51)
IP1751G18-PU

0.67
(17)

0.99
(25)

0.73
(18.5)

G 1/8"

4.02
(102)

2.01
(51)

IP2050G18

 0.79
(20)		 1.10
(28)		 0.73
(18.5)		 G 1/8" 3.98
(101)		 1.97
(50)
IP2050G18-PU 0.79
(20)		 1.10
(28)		 0.73
(18.5)		 G 1/8" 3.98
(101)		 1.97
(50)
IP2763G18 1.07
(27)		 1.58
(40)		 1.07
(27)		 G 1/8" 4.69
(119)		 2.48
(63)
IP2763G18-PU 1.07
(27)		 1.58
(40)		 1.07
(27)		 G 1/8" 4.69
(119)		 2.48
(63)
IP3760G38 1.46
(37)		 1.97
(50)		 1.54
(39)		 G 3/8" 4.73
(120)		 2.36
(60)
IP3760G38-PU 1.46
(37)		 1.97
(50)		 1.54
(39)		 G 3/8" 4.73
(120)		 2.36
(60)
IP4761G38 1.85
(47)		 2.56
(65)		 1.93
(49)		 G 3/8" 4.88
(124)		 2.40
(61)
IP4761G38-PU 1.85
(47)		 2.56
(65)		 1.93
(49)		 G 3/8" 4.88
(124)		 2.40
(61)

 

To see how the inflatable picker
works, click here.


For Larger view of Inflatable Picker
in action click here.

  • Note: Very little pressure is required to hold loads.  Using an air pressure regulator, dial down the force to only the minimum pressure required to hold the load and no more.  This will greatly lengthen the service life of the replaceable rubber bladder. Use of excess pressure may rupture or force the rubber bladder off the end. 


 

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570
Home: www.anver.com    email:

Copyright © ANVER Corp. 2008

Terms of use