Vacuum Cups and Suction Cups
Suction Cup Level Compensator Mounting Brackets
Universal SLSA Mounting Brackets for Aluminum Extrusions of All Types

We designed these brackets to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of bracket is not available from other companies because it is specific to our vacuum cup suspensions. Our brackets are made of tumbled and anodized 1/4" (6 mm) aluminum, and our ANVER SLSA Series Spring Level Compensators fit right into the end. These brackets are designed to be used with any number of aluminum extrusion systems manufactured by other companies. Our brackets are designed for either inch or metric, 25 mm, 28 mm and approx. 40 mm sizes. Simply add two typical 8 mm bolt clamps (not included) for your particular brand to easily make an EOAT (end of arm tool). The brackets can be adjusted and locked into position on the top or bottom of the extrusion rail.

	Product Photo (Click to Enlarge)	Part No.	A in. (mm)	B in. (mm)	C in. (mm)	Description	Level Compensator Suspensions	Weight lb (grams)
Brackets for SLSA-1 Suspensions
		28500230	0.48 (12.7)	2.00 (50.8)	5.00 (127)	Mounting Bracket for SLSA-1 Alum - 2 x 5 x 0.48		0.165 (75)
		28500232	0.48 (12.7)	1.00 (25.4)	4.00 (102)	Mounting Bracket for SLSA-1 Alum  - 1 x 4 x 0.48		0.138 (63)
Brackets for SLSA-2 Suspensions
		28500239	0.64 (16.2)	2.00 (50.8)	5.00 (127)	Mounting Bracket for SLSA-2  Alum - 2 x 5 x 0.64		0.159 (72)
		28500240	0.64 (16.2)	1.00 (25.4)	4.00 (101.6)	Mounting Bracket for SLSA-2  Alum - 1 x 4 x 0.64		0.132 (60)
Brackets for SLSA-3 Suspensions
		28500231	0.75 (19.0)	2.00 (50.8)	5.00 (127)	Mounting Bracket for SLSA-3 Alum - 2 x 5 x 0.75		0.161 (73)
		28500233	0.75 (19.0)	1.00 (25.4)	4.00 (102)	Mounting Bracket for SLSA-3 Alum - 1 x 4 x 0.75		0.135 (61.2)

Note: If the above do not suit the requirements of your design, we also make custom mounting brackets on request.

 

SLSA-1 in Action

SLSA-2 in Action

Mounting Components Fit Popular "EOAT" Aluminum Extrusions

Adjustable SLSA Suspension Bracket Hanger Kits for 40 mm Aluminum Extrusions

These Suspension Bracket Hanger Kits are designed to allow our cups and suspensions to be integrated into aluminum extrusion systems in a simple, low cost manner. This type of suspension bracket hanger kit is not available from other companies because it is specific to our vacuum cup suspensions. Our suspension bracket hanger kits are made of tumbled and anodized 1/4" aluminum, and our ANVER SLSA Series Spring Level Compensators fit right into the end. These brackets are designed for  approx. 40 mm size aluminum extrusions. The brackets can be adjusted and locked into position on the top or bottom of the extrusion rail. Mounting plates for this style are also available.

	Product Photo (Click to Enlarge)	Part No.	Description	Level Compensator Suspensions
Bracket Hangers for SLSA-1 Suspensions
		72300040	Suspension Bracket Hanger Kit for SLSA-1 Series
		28500243	Mounting Plate to Mount SLSA-1 Series to Aluminum Extrusion
Bracket Hangers for SLSA-2 Suspensions
		72300032	Suspension Bracket Hanger Kit for SLSA-2 Series
		28500244	Mounting Plate to Mount SLSA-2 Series to Aluminum Extrusion
Bracket Hangers for SLSA-3 Suspensions
		72300041	Suspension Bracket Hanger Kit for SLSA-3 Series
		28500245	Mounting Plate to Mount SLSA-3 Series to Aluminum Extrusion

Note: If the above do not suit the requirements of your design, we also make custom mounting brackets on request.