Vacuum Cups and Suction Cups
P-Series - FP Flat Ring Vacuum Cups and Suction Cups

View Printer-Friendly PDF Page

Vacuum Cup Materials:

• The standard materials are Neoprene (NEO) and Silicone (SIT).

• For more information on the materials, Click Here.

NOTE: Click on any of the the small thumbnail photos in this chart to enlarge for more detail and specifications.

	Product Photo (Click to Enlarge)	ANVER  and P-Series Description and Part No.	Static  Diameter * in. (mm)	Static Height * in. (mm)	Load Capacity at 24 in. Hg (609.6mm Hg) [2:1 Safety Factor] lb (kg)	Pull-Off Capacity at 27 in. Hg (685.8mm Hg) [1:1 Safety Factor] lb (kg)
		FP200 CUP & FITTING (Translucent Silicone) A-3350072 33.50.072 FP200.45.20UA	9.4 (240)	1.1 (27)	266 (27)	600 (27)
		FP200 SEALING RING (Translucent Silicone) A-3350148 33.50.148 FP200.45	9.0 (228)	0.8 (20)	266 (27)	600 (27)
		FP300 CUP & FITTING (Translucent Silicone) A-3350073 33.50.073 FP300.45.30UA	13.8 (350)	1.2 (31)	622 (27)	1400 (27)
		FP300 SEALING RING (Translucent Silicone) A-3350153 33.50.153 FP300.45	13.3 (338)	0.9 (24)	622 (27)	1400 (27)

* All cups shown above are identical in size and shape to P-Brand's cups. The 'static' columns represent the cup dimensions without a load as given by P-Brand.

Go to Suction Cup Main Page