ANVER Vacuum Cups, Vacuum Lifters, Vacuum Pumps, Vacuum Tube Lifters, Vacuum Sheet and Plate Lifters, Vacuum End-EffectorsVacuum Cups and Suction Cups
P-Series - U Universal Vacuum Cups and Suction Cups

View Printer-Friendly PDF Page

Vacuum Cup Materials:

  • The standard materials are Neoprene (NEO) and Silicone (SIT).

  • For more information on the materials, Click Here.

For general purpose use on flat or slightly curved surfaces. Available in sizes from 0.21 to 2.03 inches (5.2 to 51.6 mm)

NOTE: Click on any of the the small thumbnail photos in this chart to enlarge for more detail and specifications.

Product
Photo
(Click to Enlarge)

ANVER and P-Series
Description
and Part No.

 Static 
Diameter*
in.
(mm)		 Compressed
Diameter*
 in.
(mm)		 Static
Height*
 in.
(mm)		 Compressed
Height*
 in.
(mm)		 Load Capacity
at 24 in. Hg
(609.6mm Hg)
[2:1 Safety Factor]
lb
(kg)		 Pull-Off
Capacity
at 27 in. Hg
(685.8mm Hg)
 [1:1 Safety Factor]
lb
(kg)		 Level
Compensator
Suspensions
 (Click Image for
More Info)
U4 Cups
A-3150114

U4-NEO
(Nitrile)
A-3150114
 31.50.114
U4.10

 0.21
(5.2)		 0.22
(5.5)		 0.26
(6.6)		 0.25
(6.4)		 0.13
(0.06)		 0.29
(0.13)		 ANVER SLSA-1 Level Compensator Suspensions
A-3150114S

U4-SIT
(Translucent Silicone)
A-3150114S
 31.50.114S
U4.20

 0.21
(5.2)		 0.22
(5.5)		 0.26
(6.6)		 0.25
(6.4)		 0.13
(0.06)		 0.29
(0.13)		 ANVER SLSA-1 Level Compensator Suspensions
U4 Cups with 4-8 Fitting Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150059

U4-NEO/FITTING
(Nitrile)
A-3150059
 31.50.059
U4.10.01AB

 0.21
(5.2)		 0.22
(5.5)		 N/A N/A 0.13
(0.06)		 0.29
(0.13)		 ANVER SLSA-1 Level Compensator Suspensions
A-3150059S

U4-SIT/FITTING
(Translucent Silicone)
A-3150059S
 31.50.059S
U4.20.01AB

 0.21
(5.2)		 0.22
(5.5)		 N/A N/A 0.13
(0.06)		 0.29
(0.13)		 ANVER SLSA-1 Level Compensator Suspensions
Fittings for U4 Cups Notes Suspensions

BF3-OR BF3-OR

The BF3-OR allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market.

 ANVER SLSA-1 Level Compensator Suspensions

BF3-SHEX

The BF3-SHEX allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. A popular fitting for the North American market.

 ANVER SLSA-1 Level Compensator Suspensions
U6 Cups Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150115

U6-NEO
(Nitrile)
A-3150115
 31.50.115
U6.10

 0.28
(7.1)		 0.29
(7.4)		 0.28
(7.2)		 0.26
(6.6)		 0.25
(0.11)		 0.56
(0.25)		 ANVER SLSA-1 Level Compensator Suspensions
A-3150115S

U6-SIT
(Translucent Silicone)
A-3150115S
 31.50.115S
U6.20

 0.28
(7.1)		 0.29
(7.4)		 0.28
(7.2)		 0.26
(6.6)		 0.25
(0.11)		 0.56
(0.25)		 ANVER SLSA-1 Level Compensator Suspensions
U6 Cups with 4-8 Fitting Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150003

U6-NEO/FITTING
(Nitrile)
A-3150003
 31.50.003
U6.10.01AB

 0.28
(7.1)		 0.29
(7.4)		 N/A N/A 0.25
(0.11)		 0.56
(0.25)		 ANVER SLSA-1 Level Compensator Suspensions
A-3150003S

U6-SIT/FITTING
(Translucent Silicone)
A-3150003S
 31.50.003S
U6.20.01AB

 0.28
(7.1)		 0.29
(7.4)		 N/A N/A 0.25
(0.11)		 0.56
(0.25)		 ANVER SLSA-1 Level Compensator Suspensions
Fitting for U6 Cups Notes Suspensions

BF3-OR BF3-OR

The BF3-OR allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market.

 ANVER SLSA-1 Level Compensator Suspensions

BF3-SHEX

The BF3-SHEX allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. A popular fitting for the North American market.

 ANVER SLSA-1 Level Compensator Suspensions
U8 Cups Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150116

U8-NEO
(Nitrile)
A-3150116
 31.50.116
U8.10

 0.38
(9.5)		 0.39
(10.0)		 0.28
(7.1)		 0.23
(5.8)		 0.39
(0.18)		 0.87
(0.39)		 ANVER SLSA-1 Level Compensator Suspensions
A-3150116S

U8-SIT
(Translucent Silicone)
A-3150116S
 31.50.116S
U8.20

 0.38
(9.5)		 0.39
(10.0)		 0.28
(7.1)		 0.23
(5.8)		 0.39
(0.18)		 0.87
(0.39) 		ANVER SLSA-1 Level Compensator Suspensions
U8 Cups with 4-8 Fitting Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150004

U8-NEO/FITTING
(Nitrile)
A-3150004
 31.50.004
U8.10.01AB

 0.38
(9.5)		 0.39
(10.0)		 N/A N/A 0.39
(0.18)		 0.87
(0.39)		 ANVER SLSA-1 Level Compensator Suspensions
A-3150004S

U8-SIT/FITTING
(Translucent Silicone)
A-3150004S
 31.50.004S
U8.20.01AB

 0.38
(9.5)		 0.39
(10.0)		 N/A N/A 0.39
(0.18)		 0.87
(0.39)		 ANVER SLSA-1 Level Compensator Suspensions
Fitting for U8 Cups Notes Suspensions

BF3-OR BF3-OR

The BF3-OR allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. Featuring an improved barb design, it comes with a captured O-ring for a vacuum tight seal. A popular fitting for the North American market.

 ANVER SLSA-1 Level Compensator Suspensions

BF3-SHEX

The BF3-SHEX allows you to screw directly into any of the SLSA-1 Suspensions which are 5 mm female. A popular fitting for the North American market.

 ANVER SLSA-1 Level Compensator Suspensions
U10 Cups Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150117

U10-NEO
(Nitrile)
A-3150117
 31.50.117
U10.10

 0.44
(11.1)		 0.44
(11.1)		 0.42
(10.5)		 0.37
(9.4)		 0.67
(0.30)		 1.50
(0.68)		 ANVER SLSA-1 Level Compensator Suspensions
A-3150117S

U10-SIT
(Translucent Silicone)
A-3150117S
 31.50.117S
U10.20

 0.44
(11.1)		 0.44
(11.1)		 0.42
(10.5)		 0.37
(9.4)		 0.67
(0.30)		 1.50
(0.68)		 ANVER SLSA-1 Level Compensator Suspensions
U10 Cups with 10-15 Fitting Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150005

U10-NEO/FITTING
(Nitrile)
A-3150005
 31.50.005
U10.10.01AC

 0.44
(11.1)		 0.44
(11.1)		 N/A N/A 0.67
(0.30)		 1.50
(0.68)		 ANVER SLSA-1 Level Compensator Suspensions
A-3150005S

U10-SIT/FITTING
(Translucent Silicone)
A-3150005S
 31.50.005S
U10.20.01AC

 0.44
(11.1)		 0.44
(11.1)		 N/A N/A 0.67
(0.30)		 1.50
(0.68)		 ANVER SLSA-1 Level Compensator Suspensions
Fitting for U10 Cups Notes Other Fittings Suspensions
BM5 BM5 FITTING M5 MALE
Replaces
10-15 FITTING
A-3107030
31.07.030
01AC

The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions.

 Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
BM10-32-OR

10-32 FITTING UNF MALE

BM10-32
01AC

The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Popular alternate fitting for the North American market.

 Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
U15 Cups Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150118

U15-NEO
(Nitrile)
A-3150118
 31.50.118
U15.10

 0.66
(16.8)		 0.70
(17.6)		 0.48
(12.0)		 0.38
(9.5)		 1.11
(0.50)		 2.50
(1.13)		 ANVER SLSA-1 Level Compensator Suspensions
A-3150118S

U15-SIT
(Translucent Silicone)
A-3150118S
 31.50.118S
U15.20

 0.66
(16.8)		 0.70
(17.6)		 0.48
(12.0)		 0.38
(9.5)		 1.11
(0.50)		 2.50
(1.13)		 ANVER SLSA-1 Level Compensator Suspensions
U15 Cups with Fitting Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150006

U15-NEO/FITTING
(Nitrile)
A-3150006
 31.50.006
U15.10.01AC

 0.66
(16.8)		 0.70
(17.6)		 N/A N/A 1.11
(0.50)		 2.50
(1.13)		 ANVER SLSA-1 Level Compensator Suspensions
A-3150006S

U15-SIT/FITTING
(Translucent Silicone)
A-3150006S
 31.50.006S
U15.20.01AC

 0.66
(16.8)		 0.70
(17.6)		 N/A N/A 1.11
(0.50)		 2.50
(1.13)		 ANVER SLSA-1 Level Compensator Suspensions
Fitting for U15 Cups Notes Other Fittings Suspensions
BM5 BM5 FITTING M5 MALE
Replaces
10-15 FITTING
A-3107030
31.07.030
01AC

The BM5 FITTING M5 MALE is an improved 5 mm male fitting with captured O-ring which replaces the older 10-15 FITTING M5 MALE. It allows you to screw directly into any of the SLSA-1 Suspensions.

 Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
BM10-32-OR

10-32 FITTING UNF MALE

BM10-32
01AC

The 10-32 Fitting UNF Male is a 10-32 UNF Male fitting. It allows you to screw directly into any of the SLSA-1 Suspensions. Fits all the same cups as the 10-15 Fitting above, but in a 10-32 UNF version. Popular alternate fitting for the North American market.

 Group 1 Fittings ANVER SLSA-1 Level Compensator Suspensions
U20 Cups Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150119

U20-NEO
(Nitrile)
A-3150119
 31.50.119
U20.10

 0.86
(21.8)		 0.90
(22.9)		 0.30
(7.6)		 0.20
(5.0)		 1.60
(0.73)		 3.60
(1.63)		 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
A-3150119S

U20-SIT
(Translucent Silicone)
A-3150119S
 31.50.119S
U20.20

 0.86
(21.8)		 0.90
(22.9)		 0.30
(7.6)		 0.20
(5.0)		 1.60
(0.73)		 3.60
(1.63)		 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
U20 Cups with 20-30 Fitting Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150007A

U20-NEO/1PC FITTING
(Nitrile)
A-3150007A
 31.50.007A
U20.10.02AF

 0.86
(21.8)		 0.90
(22.9)		 N/A N/A 1.60
(0.73)		 3.60
(1.63)		 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
A-3150007SA

U20-SIT/1PC FITTING
(Translucent Silicone)
A-3150007SA
 31.50.007SA
U20.20.02AF

 0.86
(21.8)		 0.90
(22.9)		 N/A N/A 1.60
(0.73)		 3.60
(1.63)		 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
U20 Cups with 20-30 Connection Plate Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150007

U20-NEO/FIT/SCREEN
(Nitrile)
A-3150007
 31.50.007

 0.86
(21.8)		 0.90
(22.9)		 N/A N/A 1.60
(0.73)		 3.60
(1.63)		 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
A-3150007S

U20-SIT/FIT/SCREEN
(Translucent Silicone)
A-3150007S
 31.50.007S

 0.86
(21.8)		 0.90
(22.9)		 N/A N/A 1.60
(0.73)		 3.60
(1.63)		 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
Fittings for U20 Cups Notes Suspensions
A-3150196

 20-30 FITTING

A-3150196
 31.50.196
02AF

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

 HSHN5 Double Male 5 mm Adapter
ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

 HS18G-18FG Double Female G 1/8" Adapter
ANVER SLSA-2 Level Compensator Suspensions
A-0101084

STRENGTHENING 
RING SILICONE 20/30

A-0101084
 01.01.084S

The Strengthening Ring 20/30 is used with the above 20-30 Fitting. It simply stretches on and snaps in place. Included with cups which use the one-piece fitting.

 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
A-3150141

20-30 CONNECTION PLATE

A-3150141
 31.50.141

For SLSA-1 Suspensions, use the HSHN5 Double Male 5 mm adapter.

 HSHN5 Double Male 5 mm Adapter
ANVER SLSA-1 Level Compensator Suspensions

For SLSA-2 Suspensions, use the HS18G-18FG Double Female G 1/8" adapter.

 HS18G-18FG Double Female G 1/8" Adapter
ANVER SLSA-2 Level Compensator Suspensions
A-3150140

 20-30 LOCKING SPACER

A-3150140
 31.50.140

The 20-30 Locking Spacer is used with the above 20-30 Connection Plate. It presses in from the bottom.

 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
U30 Cups Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150120P

U30-NEO
(Nitrile)
A-3150120P
 31.50.120P
U30.30

 1.26
(31.9)		 1.29
(32.7)		 0.40
(10.1)		 0.21
(5.3)		 2.98
(1.35)		 6.70
(3.04)		 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
A-3150120S

U30-SIT
(Translucent Silicone)
A-3150120S
 31.50.120S
U30.20

 1.26
(31.9)		 1.29
(32.7)		 0.40
(10.1)		 0.21
(5.3)		 2.98
(1.35)		 6.70
(3.04)		 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
U30 Cups with 20-30 Fitting Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150008PA

U30-NEO/1PC FITTING
(Nitrile)
A-3150008PA
 31.50.008PA
U30.30.02AF

 1.26
(31.9)		 1.29
(32.7)		 N/A N/A 2.98
(1.35)		 6.70
(3.04)		 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
A-3150008SA

U30-SIT/1PC FITTING
(Translucent Silicone)
A-3150008SA
 31.50.008SA
U30.20.02AF

 1.26
(31.9)		 1.29
(32.7)		 N/A N/A 2.98
(1.35)		 6.70
(3.04)		 ANVER SLSA-1 Level Compensator Suspensions
ANVER SLSA-2 Level Compensator Suspensions
U30 Cups with 20-30 Connection Plate Static Diameter Max. Diameter Static Height Comp. Height Load Cap. Pull-Off Cap. Suspensions
A-3150008

U30-NEO/FIT/SCREEN
(Nitrile)
A-3150008
 31.50.008

 1.26
(31.9)		 1.29
(32.7)		 N/A N/A 2.98
(1.35)		 6.70
(3.04)