 |
|
|
|
|
|
|
ANVER VX Series Vacuum Suction Cup Load Leveling Extensions are unique items that are used in a variety of
applications. These extensions allow vacuum cups to grip at
various heights from the same installation plate or manifold. Each
extension can be easily adjusted to the desired height. Suction cup
extensions are especially useful for bellows-style suction cups, and
height adjustment is made easier by the deflection of the
cup. Note: These extensions are not recommended for use with flat vacuum suction cups due to the small amount of deflection flat cups provide. See our selection of SLSA Series spring loaded suspension assemblies for flat cup applications. |
Specifications
for VX Series Suction Cup Load
Leveling Extensions:
 |
Product Photo (Click to Enlarge) |
Part Number | Extension Description | A
Length in (mm) |
B G Thread |
C in (mm) |
 |
VX18-100-25 | G 1/8" X 1" (25 mm) | 1.0 (25) |
G 1/8" | 0.26 (6.5) |
|
 |
VX18-150-38 | G 1/8" X 1.5" (38 mm) | 1.5 (38) |
G 1/8" | 0.26 (6.5) |
|
 |
VX18-200-51 | G 1/8" X 2" (51 mm) | 2.0 (51) |
G 1/8" | 0.26 (6.5) |
|
 |
VX14-100-25 | G 1/4" X 1" (25 mm) | 1.0 (25) |
G 1/4" | 0.35 (9.0) |
|
 |
VX14-200-51 | G 1/4" X 2" (51 mm) | 2.0 (51) |
G 1/4" | 0.35 (9.0) |
|
 |
VX14-300-76 | G 1/4" X 3" (76 mm) | 3.0 (76) |
G 1/4" | 0.35 (9.0) |
 |
The "G" thread is also known as BSPP, commonly used world-wide for Vacuum Applications. |
Click here for Fittings for use with these Extensions
  |
|
 |
| ||||||||
View Printer-Friendly PDF Page