ANVER Vacuum Cups, Vacuum Lifters, Vacuum Pumps, Vacuum Tube Lifters, Vacuum Sheet and Plate Lifters, Vacuum End-EffectorsVacuum Cups and Vacuum Pads
VP Series - Round Vacuum Pads with Slip-On Foam Seals

View Printer-Friendly PDF Page

ANVER VP Series Round Vacuum Pads feature a slip on dual sealing ring. These foam seals are most effective on rough, uneven or textured surfaces such as stone or concrete. Available in a number of shapes, styles and materials, their dual seal design makes maintenance easy.

Features:

  • Pads adjust easily to uneven or rough surfaces for maximum safety

  • Seals are easily replaceable and economical

  • Seals are available in a large variety of shapes and materials

  • VP Series Round Vacuum Pads offer maximum versatility when used with ANVER Spring Loaded Suspension Assemblies

  • Contact ANVER for additional information
VP70-4-A1C3 VP80-4-A1C3
VP70-4-A1B8
VP80-4-A1B8
VP90-4-A1B8
Cup No. Standard
Seal No.		 A
Cup Dia.
in.
(mm)		 B
Dia.
in.
(mm)		 C
in.
(mm)		 D
in.
(mm)		 Vacuum
Port		 Rated Load
lbs
(kg)
VP70-4-A1B8
FR70-A1B8 5.88
(149)		 2.00
(51)		 0.63
(16)		 1.38
(35)		 1/4 NPT 75
(34)
VP80-4-A1B8
FR80-A1B8 6.88
(175)		 2.00
(51)		 0.63
(16)		 1.38
(35)		 1/4 NPT 100
(45)
VP90-4-A1B8
FR90-A1B8 7.88
(200)		 2.00
(51)		 0.63
(16)		 1.38
(35)		 3/8 NPT 150
(68)

Note: Rated Load at 22 in. Hg, vacuum, when used in the horizontal plane. Based on a safety factor of two (2), on vacuum holding.

This drawing applies to VP70 and VP80 versions only

This drawing applies to VP70 and VP80 versions only

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570
Home: www.anver.com    email:

Copyright © ANVER Corp. 2008

Terms of use