|
 Vacuum Suction
Cup Components
Vacuum Cup
Suspensions
Level Compensators
View Printer-Friendly PDF Page
|
|
ANVER Level
Compensators are used to compensate differences in cup height, particularly
on lifting devices with several suction cups on one frame. When a
vacuum cup is used in handling robots or similar devices, a level
compensator is often advantageous because it places fewer demands on exact
vertical positioning. These level compensators also provide a certain
amount of shock absorption. These particular level
compensators are highly specialized and made of Delrin plastic and
designed for very light loads and miniature cups.
|
Specifications
for A-100 Series Vacuum Cup Level Compensators:
 |
Click
to Enlarge
and for Spec. Drawing |
ANVER Part No. |
Exact
P-Series
Replacement Number |
Stroke
in.
(mm) |
Static
Height
in.
(mm) |
Mounting |
|
 |
A-100J |
A100J |
0.81
(20.6) |
2.69
(68.3) |
Flanged
for Direct Cup Mount |
|
 |
A-101IPB |
A101IPB |
0.81
(20.6) |
2.35
(59.6) |
1/8
- 27 NPT Female |
|
 |
A-102EPB |
A102EPB |
0.81
(20.6) |
2.69
(68.3) |
1/8
- 27 NPT Male |
|
 |
A-C375 |
N/A |
0.86
(21.9) |
2.43
(61.8) |
10/32 NPT Female |
Go
Back to Miniature Hi-Tech Vacuum Cups Page
Go
Back to P-Series Replacement Page
Go
Back to Vacuum Cup Suspension Page
| 