site map

ANVER Vacuum Cups, Vacuum Lifters, Vacuum Pumps, Vacuum Tube Lifters, Vacuum Sheet and Plate Lifters, Vacuum End-EffectorsVacuum Cups and Vacuum Pads
VP Series - Large Vacuum Pads with Snap-On Seals

View Printer-Friendly PDF Page

Large Vacuum Pads with Snap-On Seals

 ANVER's Large VP Series Vacuum Pads feature hand replaceable sealing rings and rugged high quality steel hubs making these some of the most versatile and economical vacuum cups available. Large VP Series Vacuum Cups can be mounted in a variety of ways.

Features:

  • Economical - seals replace easily in minutes

  • No tools needed
  • Cleated bottoms for maximum capacity in both vertical and horizontal applications
  • Short lip design for quick attach and release
  • Heavy Duty steel hubs can be mounted in a variety of ways

Vacuum Cup Materials:

  • The standard materials are Nitrile (NBR) and Silicone (SI)).

  • For more information on the materials, Click Here.

ANVER Large VP Series Vacuum Pads

Specifications for Large VP Series Vacuum Pads with Replaceable Seals:

Product
Photo		 Vacuum
Pad Number
and Material		 Replacement
Seal Number		 Mounting
Type		 Seal Dia.
in.
(mm)		 L
in.
(mm)		 W
in.
(mm)		 C
in.
(mm)		 D
in.
(mm)		 Vacuum
Port
NPT		 H
Mounting
Holes		 Shipping
Weight
lb
(kg)		 Capacity*
lb
(kg)		 Vacuum Pad
Has Been
Replaced by...
VP128Q-NBR
 (Nitrile)
SR-128 Quad-Spring 13.25
(337)		 5.66
(141)		 5.66
(141)		 0.42
(11)		 1.42
(36)		 3/8" M10 x 1.5 11
(5.0)		 600
(272)
VC119Q
VP128Q-SI
 (Silicone)
SR-128-SI Quad-Spring 13.25
(337)		 5.66
(141)		 5.66
(141)		 0.42
(11)		 1.42
(36)		 3/8" M10 x 1.5 11
(5.0)		 600
(272)
VP128S-NBR
 (Nitrile)
SR-128 Ball Swivel 13.25
(337)		 - - 0.42
(11)		 2.44
(62)		 3/8" - 12
(5.5)		 600
(272)
VC119-4
VP128S-SI
 (Silicone)
SR-128-SI Ball Swivel 13.25
(337)		 - - 0.42
(11)		 2.44
(62)		 3/8" - 12
(5.5)		 600
(272)
VP128C-NBR
 (Nitrile)
SR-128 Clevis 13.25
(337)		 - - 0.42
(11)		 2.92
(74)		 3/8" - 13
(5.9)		 600
(272)
VC119Q
VP128C-SI
 (Silicone)
SR-128-SI Clevis 13.25
(337)		 - - 0.42
(11)		 2.92
(74)		 3/8" - 13
(5.9)		 600
(272)
- Product Photo Pad No. - Seal No. Mounting Seal Dia. L W C D Port H Weight Capacity* Replaced by...
VP158Q-NBR
 (Nitrile)
SR-158 Quad-Spring 16.25
(413)		 6.5
(165)		 4.0
(102)		 0.44
(11)		 2.13
(51)		 1/2" 3/4 - 10 25
(11.4)		 1200
(544)
VP1220-NBR
VP158Q-SI
 (Silicone)
SR-158-SI Quad-Spring 16.25
(413)		 6.5
(165)		 4.0
(102)		 0.44
(11)		 2.13
(51)		 1/2" 3/4 - 10 25
(11.4)		 1200
(544)
Photo
to Come		 VP158Q-NBR-570
 (Nitrile)
SR-158 Quad-Spring** 16.25
(413)		 9.0
(229)		 4.0
(102)		 0.44
(11)		 2.13
(51)		 1/2" 3/4 - 10 25
(11.4)		 1200
(544)
VP1220-NBR
VP158Q-SI-570
 (Silicone)
SR-158-SI Quad-Spring** 16.25
(413)		 9.0
(229)		 4.0
(102)		 0.44
(11)		 2.13
(51)		 1/2" 3/4 - 10 25
(11.4)		 1200
(544)
VP158C-NBR
 (Nitrile)
SR-158 Clevis 16.25
(413)		 - - 0.44
(11)		 3.94
(98)		 1/2" - 26
(11.8)		 1200
(544)
VP1220-NBR
VP158C-SI
 (Silicone)
SR-158-SI Clevis 16.25
(413)		 - - 0.44
(11)		 3.94
(98)		 1/2" - 26
(11.8)		 1200
(544)
 * Rated Load Capacity at 24 inch Hg vacuum when used in the horizontal plane based on a vacuum holding safety factor of two. Standard seal material is ANVER’s exclusive non-marring blue Nitrile rubber (NBR).  Silicone (SI) is also available.
**For Use only on Suspension Assemblies with 5" x 7" Slides.  Consult Factory.
Click Here to See More Details of Different Suction Cup and Vacuum Cup Materials

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  +1-978-568-0221  -  Fax: +1-978-568-1570
Home: www.anver.com    email:

Copyright © ANVER Corp. 2012

Terms of use