VC Series Small Center Suspension and Vacuum Port Vacuum Cups

Vacuum Cups and Suction Cups
Center Suspension and Vacuum Port Style Vacuum Cups
VC Series: VC25, VC35, VC40 and VC45

Production quality construction with a universal design make ANVER VC Series Vacuum Cups suitable for most applications. Thick rubber bonded to a machined aluminum base make these vacuum cups rugged and long lasting. VC Vacuum Cups are well suited for high duty use found in the automotive industry and in press feeding operations.

Features:

Rugged construction design with deep threaded mounting hole for use in heavy production.
Long low-angle lip requires little pressure to make initial contact. This flexibility also compensates for inaccuracies in cup height.
Two inside sealing edges make contact after vacuum is attained and become the main sealing edges for safety.
Strengthened outside lip helps achieve a fast, even release.
Durable, soft rubber bonded to a stiff aluminum hub gives these vacuum cups an excellent non-skid grip.
Cleated bottom makes these vacuum cups excellent for both horizontal and vertical loads.

Recommended Usage:

On light gauge sheet and other thin materials to thick blocks.
On lightly textured surfaces, such as fiberglass panels, plastic, auto panels, auto glass, etc.
On wavy or contoured surfaces.
These vacuum cups have a relatively large port, making them suitable for handling even porous materials.
Suspension Assemblies are available in a variety of styles and sizes.

Vacuum Cup Materials:

The standard material is Blue Nitrile.
Silicone is sometimes in stock while other compounds are available on special order; contact factory for details.
For more information on the materials, Click Here.

VC Series Center Suspension and Vacuum Port Vacuum Cups

VC Series Vacuum Cups Dimensional Specifications:

Product Photo
(Click to Enlarge)

Cup No.
and Material

A
Dia.
in.
(mm)

A'
Dia.
in.
(mm)

C
Flex
in.
(mm)

F
Height
in.
(mm)

G
Flat
in.
(mm)

H
Vacuum/
Suspension
Port

*Rated
Load
(Horizontal)
lb
(kg)

Weight
lb
(kg)

Adapter
Fitting
for Suspension

SLSA3
Series
Suspension

VC25
(Nitrile)

2.50
(63.5)

2.75
(70)

0.26
(7)

1.14
(29)

0.98
(25)

1/4" NPT

15
(6.8)

0.10
(0.05)

No
Adapter
Needed

VC25-SI
(Silicone)

2.50
(63.5)

2.75
(70)

0.26
(7)

1.14
(29)

0.98
(25)

1/4" NPT

15
(6.8)

0.10
(0.05)

No
Adapter
Needed

VC35
(Nitrile)

3.50
(89)

3.75
(95)

0.33
(8)

1.38
(35)

0.98
(25)

3/8" NPT

30
(13)

0.15
(0.07)

VC35-SI
(Silicone)

3.50
(89)

3.75
(95)

0.33
(8)

1.38
(35)

0.98
(25)

3/8" NPT

30
(13)

0.15
(0.07)

VC40
(Nitrile)

4.00
(100)

4.25
(110)

0.37
(9.4)

1.18
(30)

0.95
(24)

3/8" G

45
(20)

0.18
(0.08)

Info to
Come

VC45
(Nitrile)

4.50
(114)

4.63
(117)

0.38
(10)

1.61
(41)

1.26
(32)

3/8" NPT

55
(24)

0.35
(0.16)

VC45-SI
(Silicone)

4.50
(114)

4.63
(117)

0.38
(10)

1.61
(41)

1.26
(32)

3/8" NPT

55
(24)

0.35
(0.16)

The cup capacities shown above are based on 24"Hg at sea level with a safety factor of two (2) in the horizontal (flat), and four (4) in the vertical (upright). Vertical Load Capacity is half of the listed Horizontal Load Capacities above.
Rated Load Capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum.

Vacuum Cups and Suction Cups Center Suspension and Vacuum Port Style Vacuum Cups VC Series: VC25, VC35, VC40 and VC45

Vacuum Cups and Suction Cups
Center Suspension and Vacuum Port Style Vacuum Cups
VC Series: VC25, VC35, VC40 and VC45