ANVER Vacuum Cups, Vacuum Lifters, Vacuum Pumps, Vacuum Tube Lifters, Vacuum Sheet and Plate Lifters, Vacuum End-EffectorsVacuum Cups and Suction Cups
Vacuum Cups with Center Suspension and Side Vacuum Port
 VC Series: VC57, VC65, VC75, VC95R-2 and VC119-2

View Printer-Friendly PDF Page

Universal Medium Vacuum Cups with Center Suspension and Side Vacuum Port

 These ANVER vacuum cups feature production quality construction, with a universal design, suitable for most applications. Machine rod suspension mounting, with side vacuum port, ensures strong, long lasting, airtight connections.

Features:

  • Rugged construction designed for production use.

  • Long low-angle lip requires little pressure to make initial contact. This flexibility compensates for inaccuracies in cup height.
  • Two inside sealing edges make contact after vacuum is attained and become the main sealing edges for safety.
  • Cleated bottom eliminates puckering or slipping. Excellent for horizontal or vertical applications.
  • Soft, pliable rubber bonded to a stiff aluminum hub gives these cups an easy quick-attach and a tremendous non-skid grip.

 

Universal Medium Vacuum Cups with Center Suspension and Side Vacuum Port

Recommended Usage:

  • For light gauge sheet and other thin materials to thick blocks.

  • Lightly textured surfaces, such as fiberglass panels, auto panels, etc.
  • Wavy or contoured surfaces.
  • These cups are flexible, making them suitable for handling cartons.

Vacuum Cup Materials:

  • The standard material is Nitrile.
  • Silicone and other materials are available; allow for longer lead time.

  • For more information on the materials, Click Here.

Dimensional Specifications for VC Series Vacuum Cups:

Diagram of Universal Medium Vacuum Cups with Center Suspension and Side Vacuum Port
VC57, VC65, VC75 VC95R-2, VC119-2
Product Photo
(Click to Enlarge)

Vacuum Cup
No.
and Material

A
Dia.
in.
(mm)

A'
Dia.
in.
(mm)

C
Flex
in.
(mm)

 E
Port

F
Height
in.
(mm)

G
Flat
in.
(mm)

H
Suspension
Connection

*Rated Load
(Horizontal)
lb
(kg)

Weight
lb
(kg)

 Suspension
Assembly

VC57

VC57
(Nitrile)

5.60
(142)

5.88
(149)

0.44
(11)

 1/4" NPT

1.88
(48)

1.25
(32)

1/2-13 UNC

75
(34)

0.75
(0.34)
PS57R-NBR
Series

VC65

VC65
(Nitrile)

6.30
(160)

6.63
(168)

0.50
(13)

 1/4" NPT

1.94
(49)

1.25
(32)

1/2-13 UNCT

100
(45)

0.90
(0.41)
PS65R-NBR
Series

VC75
(Nitrile)

7.40
(188)

7.63
(194)

0.56
(14)

 3/8" NPT

2.25
(57)

1.50
(38)

5/8-11 UNC

150
(68)

1.50
(0.68)
PS75R-NBR
Series

VC95R-2
(Nitrile)		 9.75
(248)		 10.00
(254)		 0.66
(17)		 3/8" NPT 2.55
(65)		 2.75
(70)		 3/4-10 UNC 250
(113)		 2.75
(1.25)
PS95R-NBR
Series
VC119-2
(Nitrile)		 12.25
(311)		 12.50
(318)		 0.50
(13)		 3/8" NPT 2.50
(64)		 2.75
(70)		 3/4-10 UNC 500
(227)		 5.44
(2.47)
PS119R-NBR
Series
* The cup capacities shown above are based on 24"Hg at sea level with a safety factor of two (2) in the horizontal (flat). Vertical Load Capacity is half of the listed Horizontal Load Capacities above.
Rated Load Capacities are estimated; actual capacity will vary based on the load surface and the level of vacuum.
Click Here to See More Details of Different Suction Cup and Vacuum Cup Materials

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570
Home: www.anver.com    email:

Copyright © ANVER Corp. 2008

Terms of use