|
View Printer-Friendly PDF Page
 |
 |
ANVER VP Series Round Vacuum Pads with A7 Slip-On Foam Sealing Rings are most effective on uneven or textured surfaces such as tread plate and small profile diamond plate, as shown above. These machined cast-aluminum pads with their slip-on seal design are both economical and easy to maintain. Part of our larger program of foam-seal vacuum pads, their suitability for a particular application is best determined by actual testing on a sample. Contact one of our applications engineers to arrange a free evaluation.
Features:
-
Pads easily adjust to textured surfaces for maximum safety
-
Seals are easily replaceable and economical
-
VP Series Round Vacuum Pads offer maximum versatility when used with ANVER Spring Loaded Suspension Assemblies
-
Contact ANVER for additional information or assistance
Specifications for Small VP Series Vacuum Pads with 'A7'-Type Slip-on Foam Seals:
 |
Product
Photo (Click to Enlarge) |
Vacuum Pad Number | Replacement Seal Number |
Mounting Type |
Mounting Hole | Vacuum Port NPT |
Seal
Dia. in. (mm) |
Overall Height in. (mm) |
Shipping Weight lb (kg) |
Capacity** lb (kg) |
 |
VP45-A7 | FR45-A7 | Thru-Port | 3/8" NPT | 3/8" | 2.8 (72) |
1.03 (26) |
0.2 (.09) |
25 (11) |
|
 |
VP57-A7 | FR57-A7 | Rigid
with Side Port |
1/2-13 UNC | 1/4" | 3.5 (89) |
1.57 (40) |
0.5 (.23) |
40 (18) |
|
 |
VP65-A7 | FR65-A7 | Rigid
with Side Port |
1/2-13 UNC | 1/4" | 4.1 (104) |
1.61 (40) |
0.6 (.27) |
55 (25) |
|
 |
VP75-A7 | FR75-A7 | Rigid
with Side Port |
5/8-11 UNC | 3/8" | 4.8 (122) |
1.67 (42) |
0.9 (.41) |
75 (34) |
Actual capacity depends on load surface, and condition of the vacuum generating system, and must be determined by the user.
 |
Typical Foam Seal for Small VP Series; slips on outside ring. |
| ||||||||