Large Capacity Vacuum Pads with Bonded Seals

ANVER Rectangular Bonded Vacuum Seal Pad Attachments are ideal for lifting heavy, compact loads in situations where the available load surface precludes the use of lifters with multiple pads.

Features:

Bonded seal construction with internal steel plate reinforcement - Can handle both heavy and thin brittle loads
High Lifting Capacity for a compact size
Non-slip rubber bottom can handle thin or brittle materials without deforming or breaking them
Shallow lip for quick attach and release
An excellent pad for handling glass and stone panels in the vertical and horizontal position
Takes a 3/8" NPT port hose nipple
Note that the pad comes with M10 x 1.5 threaded mounting holes which do not protrude further than the metal plate. They are blind and sealed by the rubber underneath. If you bolt these pads to a plate you need to select the correct length Metric Screws so they do not protrude too far and poke through the rubber. If the rubber underneath the bolts is pierced these pads will leak.
Silicone material also available, consult factory for more information.

* Notes:
• Rated load at 22 in. Hg, vacuum, when used in the horizontal plane. Based on a safety factor of two (2), on vacuum holding.
• Safety factor increases at vacuum levels higher than 22” Hg.