Air Mover Style Vacuum Pumps, Adjustable Flow Tubes and Air Transfer Tubes

Precision Made Air Powered Vacuum Pumps with a Very High Flow at a Low Vacuum Level for Specialized Applications

ANVER FT Series Adjustable Flow Tubes
ANVER Adjustable Flow Tubes provide an economical means of producing high vacuum flow and high exhaust flow using a minimal amount of compressed air. On the vacuum side, they can be used to generate high amounts of flow to rapidly evacuate large volumes of air. They can also be used where leakage is a major problem and other types of vacuum devices are unable to produce enough vacuum flow to compensate for the leakage. On the exhaust side, flow tubes can be efficient alternatives to expensive electric blowers or raw compressed air lines for parts cooling, blow-off and drying. Made of aluminum to precise CNC machine tolerances for consistent performance, ANVER Adjustable Flow Tubes have an anodized finish for protection against wear. A straight-through bore design allows all material to pass without clogging for maintenance-free operation.

Features:
• Adjustable High Output Exhaust
• Adjustable High Vacuum Flow Creation
• Compact Size
• Low Air Consumption
• Instant On/Off
• Explosion-Proof
• No O-Rings or Gaskets

Typical Use:
• Air Bearing
• Fume Removal
• Cooling
• Drying
• Chip and Dust Removal
• Part Ejection
• Paper Feeding
• Tank Purging

Air Movers, Air Transfer Tubes, Air Flow Tubes, Vacuum Pumps, Venturis, Vacuum Generators, Ejectors

Performance and Dimensional Specifications:

Product Photo
(Click to Enlarge)

Model
Number

Bore ID
in.
(mm)

Air
Usage*
SCFM
(l/min.)

Output*
SCFM
(l/min)

Max. Vac.
in. Hg
(mm Hg)

Amp-
lification
Ratio

A
in.
(mm)

B
Barb
in.
(mm)

(B)
Optional
Hose to Fit Exhaust Barb

C
Approx.
in.
(mm)

D
in.
(mm)

E
Inlet
Port

(E)
Optional
G to NPT
Inlet Port Adapter

F
Barb
in.
(mm)

(F)
Optional
Hose to Fit Incoming Barb

G
in.
(mm)

Optional Clamp
Mount

FT020

(CDF200H
KVPCOF200H)

0.25
(6.3)

3
(85)

18
(340)

5
(127)

6:1

1.32
(33.4)

0.53
(13.5)

ANVER Hose, 1/2" ID, Clear PVC, Steel Reinforced, Heavy Wall HS50

3.75
(95.3)

2.10
(53.5)

G 1/8"

1.00
(25.4)

ANVER Hose, 1" ID, Clear PVC, Steel Reinforced, Standard Wall HS100

0.94
(24.0)

FT050 **

(CDF500H
CD500H
KVPCOF500H)

0.50
(12.7)

9
(255)

75
(2124)

3
(76)

8:1

1.90
(49.0)

1.00
(25.4)

4.50
(114.5)

2.13
(54.0)

G 1/4"

1.50
(38.1)

ANVER Hose, 1-1/2" ID, Clear PVC, Steel Reinforced, Standard Wall HS114

0.94
(24.0)

FT075

(CDF750H
KVPCOF750H)

0.75
(19.1)

9
(255)

110
(3115)

1.5
(38)

12:1

2.38
(60.4)

1.25
(31.8)

ANVER Hose, 1-1/4" ID, Clear PVC, Steel Reinforced, Standard Wall HS114

4.97
(126.0)

2.63
(66.7)

G 1/4"

2.00
(52.0)

ANVER Hose, 2" ID, Clear PVC, Steel Reinforced, Standard Wall HS200

0.94
(24.0)

FT100

(CDF1000H
KVPCOF1000H)

1.00
(25.4)

9
(255)

145
(4106)

1
(25)

16:1

2.38
(60.4)

1.50
(38.1)

4.97
(126.0)

2.53
(64.1)

G 1/4"

2.00
(52.0)

0.94
(24.0)

* Air usage and Output are based on an input pressure of 80 PSIG.
** Note: Optional CLAMP51P requires tape wrap to fit tightly on FT050.

The "G" thread is also known as BSPP, commonly used world-wide for Vacuum Applications.

Air Movers: ANVER TT Series Transfer Tubes

ANVER Transfer Tubes can provide a compact, low cost and effective method for the in-line conveyance of small components, odd shapes, powders or continuously fed material. These transfer tubes are designed to instantaneously provide air movement the moment compressed air is applied. By regulating the input air pressure, the transfer speed and output flow can be infinitely controlled. The instantaneous vacuum flow and high air velocity, along with the transfer tube's straight-through, smooth bore design, allow materials to pass through the tube at high speeds without clogging, providing a maintenance free method of material conveyance.

Features:
• Instant Flow
• Compact Size
• Maintenance Free
• Low Air Consumption
• Explosion Proof
• No O-Rings or Gaskets

Typical Use:
• Pneumatic Conveying
• Hopper Loading
• Bulk Loading
• Dust Removal
• Trim Waste Removal

Air Movers. Air Transfer Tubes, Air Flow Tubes, Vacuum Pumps, Venturis, Vacuum Generators, Ejectors

Performance and Dimensional Specifications:

Product Photo (Click to Enlarge)	Model Number	Bore ID in. (mm)	Air Usage* SCFM (l/min)	Output* SCFM (l/min)	Max. Vacuum in. Hg (mm Hg)	Velocity ft/sec (m/sec)	øA in. (mm)	B Barb in. (mm)	Optional Hose to Fit Both Barbs	C in. (mm)	D in. (mm)	E Inlet Port	Optional G to NPT Inlet Port Adapter	Optional Clamp Mount
	TT03 (DF3-3 D3-3 KVPDF3-3)	0.375 (9.5)	10 (283)	15 (425)	6 (152)	395 (120)	1.25 (31.8)	0.75 (19.1)		3.75 (95.3)	0.50 (12.7)	G 1/8"
	TT05 (DF5-6 D5-6 KVPDF5-6)	0.500 (12.7)	24 (680)	30 (850)	6 (152)	360 (110)	1.50 (38.1)	1.00 (25.4)		5.75 (146.1)	0.63 (15.9)	G 1/4"
	TT07 (DF7-6 D7-6 KVPDF7-6)	0.750 (19.1)	48 (1359)	60 (1699)	8 (203)	325 (99)	2.00 (50.8)	1.25 (31.8)		8.00 (203.2)	1.00 (25.4)	G 1/4"
	TT10 (DF10-3 D10-3 KVPDF10-3)	1.00 (25.4)	48 (1359)	95 (2690)	6 (152)	290 (88)	2.25 (57.2)	1.50 (38.1)		8.00 (203.2	1.00 (25.4)	G 1/4"

* Air usage and Output are based on an input pressure of 80 PSIG.

The "G" thread is also known as BSPP, commonly used world-wide for Vacuum Applications.

Vacuum Pumps and Vacuum Generators Air Mover Style Vacuum Pumps Adjustable Flow Tubes and Transfer Tubes

Precision Made Air Powered Vacuum Pumps with a Very High Flow at a Low Vacuum Level for Specialized Applications

Vacuum Pumps and Vacuum Generators
Air Mover Style Vacuum Pumps
Adjustable Flow Tubes and Transfer Tubes