Vacuum Pumps, Venturis, Vacuum Generators, EjectorsVacuum Pumps and Vacuum Generators
ANVER Small Compressed Air Venturi Vacuum Pumps
JV Series - Advanced, Plastic Bodied Mini Vacuum Pumps

View Printer-Friendly PDF Page


Click for an larger How-to install page

ANVER JV Series Mini Vacuum Generators are ideal for use as vacuum pumps where space is limited or for use as a lightweight stand alone vacuum pump such as in robotic applications. Their small size permits mounting close to the load pick-up point, decreasing response time and minimizing air consumption. Thermoplastic construction ensures excellent performance characteristics while providing an economical vacuum solution for many design applications.

The JV Series are mini venturi vacuum generators. The vacuum control of these vacuum pumps is served through a separate manual or automatic control valve situated on the compressed air supply line. Available with 5 mm female threads (which 10/32 fits right in) or with 5/32" (4 mm) O.D. Tube Connection Ports.

JV Series pumps are suggested for use anywhere vacuum is required and a simple, low maintenance and lightweight design is desired.

 

Not available for export to France.

Features:

  • High speed, high 26" hg. vacuum and excellent flow for the size of the pump

  • Minimum Space Requirements. They are the size of fittings
  • Available with or without valves or silencers, installation is straightforward
  • Can be Manifold Mounted or used individually - one per vacuum cup, inline fashion
  • Economical, Lightweight, Quiet Operation  - The JV pump weighs only 16 grams!
  • Low Air Consumption and no moving parts to wear out
  • Plastic bodies can handle temperature and moisture variances well
  • A proven design Made in the USA by ANVER Corp.

Ordering Information:
 The JV Series Mini Vacuum Generators are available in two model sizes each available with a standard M5 female thread port connection (which 10/32 fits right in) or an optional push-to-connect vacuum and pressure port connection (T designation) for 5/32" (4 mm) O.D. Tubing. The Models JV07 and JV09 denote the basic vacuum generator only.  Adding a control valve for the air supply can transform the basic generator into a compact vacuum system (JV07CE&D and JV09CE&D designations) with built-in 24VDC vacuum control. The control valve is mounted directly to the vacuum generator body, and all air passages are internal to the system.

Specifications:

  • Requires 50 Micron, Filtered, Non-lubricated, Dry Compressed Air. 

  • Optimum Operating Pressure is 5 bar (72.5 psi)

  • Operating Temperature is -10 to +80°C (14 to 176°F)

Product
Photo
(Click to Enlarge)

 Model
Number

Description

 Tubing/
Fittings		 Max
Vacuum
Level
in. Hg
(mm Hg)		 Vacuum Flow
scfm
(l/min)		 Air
Consumption
scfm
(l/min)
JV Series Basic Vacuum Generators 

JV07

Mini Vacuum Generator with M5 - 10/32  Ports

 26
(660)		 0.50
(14)		 0.74
(21)

JV09 Mini Vacuum Generator with M5 - 10/32 Ports 26
(660)		 0.74
( 21)		 1.27
(36)

JV07T

Mini Vacuum Generator for 5/32" (4 mm) O.D. Tubing

 26
(660)		 0.50
(14)		 0.74
(21)

JV09T

Mini Vacuum Generator for 5/32" (4 mm) O.D. Tubing

 26
(660)		 0.74
( 21)		 1.27
(36)
JV Series Basic Vacuum Generators with Muffler

JV07ES

JV07 Mini Vacuum Generator with muffler, with M5 - 10/32 Ports

 26
(660)		 0.50
(14)		 0.74
(21)

JV09ES

JV09 Mini Vacuum Generator with muffler, with M5 - 10/32 Ports

 26
(660)		 0.74
( 21)		 1.27
(36)

JV07TES

JV07T Mini Vacuum Generator with muffler,  5/32" (4 mm) O.D. Tubing

 26
(660)		 0.50
(14)		 0.74
(21)

JV09TES

JV09T Mini Vacuum Generator with muffler,  5/32" (4 mm) O.D. Tubing

 26
(660)		 0.74
( 21)		 1.27
(36)
JV Series Vacuum Generators with Single Valve to Control Vacuum

JV07CE

JV07 Mini Vacuum Generator with 24vdc Vacuum Control Valve,
with M5 - 10/32  Ports 

 26
(660)		 0.50
(14)		 0.74
(21)

JV09CE

JV09 Mini Vacuum Generator with 24vdc Vacuum Control Valve,
with M5  - 10/32 Ports

 26
(660)		 0.74
( 21)		 1.27
(36)

JV07CET JV07T Mini Vacuum Generator with 24vdc Vacuum Control Valve,
5/32" (4 mm) O.D. Tu		 26
(660)		 0.50
(14)		 0.74
(21)

JV09CET

JV09T Mini Vacuum Generator with 24vdc Vacuum Control Valve, 
5/32" (4 mm) O.D. Tubing

 26
(660)		 0.74
( 21)		 1.27
(36)
JV Series Vacuum Generators with Double Valves to Control Vacuum and Blow-Off

JV07CED

JV07 Mini Vacuum Generator with 24vdc Vacuum & Blow Off Control Valves, with M5 - 10/32 Ports

 26
(660)		 0.50
(14)		 0.74
(21)

JV09CED

JV09 Mini Vacuum Generator with 24vdc Vacuum & Blow Off Control Valves, with M5 - 10/32 Ports

 26
(660)		 0.74
( 21)		 1.27
(36)

JV07TCED

JV07T Mini Vacuum Generator with 24vdc Vacuum & Blow Off Control Valves, 5/32" (4 mm) O.D. Tubing

 26
(660)		 0.50
(14)		 0.74
(21)

JV09TCED

JV09T Mini Vacuum Generator with 24vdc Vacuum & Blow Off Control Valves,  5/32" (4 mm) O.D. Tubing

 26
(660)		 0.74
( 21)		 1.27
(36)

Accessories for JV Series Mini Vacuum Generators:

Product
Photo
(Click to Enlarge)

 Model
Number

Description

 Length
in.
(mm)		 Mounting
Holes
Center Distance
in.
(mm)
JVM-2

Two Station Manifold for JV Series Mini Vacuum Generators

 2.17
(55)		 1.77
(45)
JVM-4

Four Station Manifold for JV Series Mini Vacuum Generators

 3.54
(90)		 3.15
(80)
JVEM

Optional Exhaust Muffler for JV Series Mini-Vacuum Generators
(for use with JV Series Generators in stand-alone applications only).
The muffler presses on to the body and locks in place.
JVSF

Optional Sensor Fitting, allows for the addition of a Remote Mounted Vacuum Sensor
for precision control or system monitoring (for use with M5 thread port models).

 

 

For Technical and
Performance Specifications
of the Nozzle Sizes click here.
Tech Specs		 JV Series Mini Vacuum Generators, Vacuum Pumps, Venturis, Ejectors

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570
Home: www.anver.com    email:

Copyright © ANVER Corp. 2008

Terms of use