 |
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
With the ANVER VR series of Mini-Vacuum Pumps, you can connect compressed air directly at your vacuum cup. This creates a vacuum at the load, which minimizes the potential for loss of vacuum through tubing. These mini vacuum generators can be used to transform a vacuum cup into a complete lifting system. Several mini-generators can be mounted to a compressed air manifold system to pick up large groupings of separate items or one load. If some items are missing, the others will not lose vacuum, because they are each supplied separately. Simply shut off the exhaust port or the supply of compressed air to release the load. ANVER recommends using the VR05 for cups with a diameter of up to 1 inch (25 mm), and the VR07 or VR09 for cups between 1 inch (25 mm) and 4 inches (102 mm). Any model may be used on all small cups, and all systems should be tested for suitability. |
|
|
Features:
|
|
|
| Technical Drawing | Used with These Cups | Used with These Suspensions | |
  |
 Small Suction Cups |
 SLSA1 Suspensions (M5 NPT) |
 SLSA2 Suspensions (G 1/8" male) |
Specifications:
 |
Product
Photo (Click to Enlarge) |
Part Number |
Top Supply Port |
Bottom Vacuum Port |
Side Exhaust Port |
Vacuum
Flow |
Max.
Vacuum Level |
Air
Consumption |
Supply
Pressure |
|
|
|
VR05 | 1/4"
NPT Female Thread |
6
mm Female Thread |
M5 Male Thread |
0.50 |
26 |
0.74 |
72.5 |
|
|
 |
VR05-G | G
1/4" Female Thread |
6
mm Female Thread |
M5 Male Thread |
0.50 (14) |
26 (660) |
0.74 (21) |
72.5 |
|
|
 |
VR07 |
1/4" NPT Female Thread |
1/8" NPT Female Thread |
M5 Male Thread |
0.50 |
26 |
0.74 |
72.5 |
|
|
 |
VR07-G | G
1/4" Female Thread |
G
1/8" Female Thread |
M5 Male Thread |
0.50 (14) |
26 (660) |
0.74 (21) |
72.5 |
| - | Product Photo | Part No. | Supply Port | Vacuum Port | Exhaust Port | Vacuum Flow | Max Vacuum Level | Air Consumption | Supply Pressure |
|
|
 |
VR09 | 1/4"
NPT Female Thread |
1/8"
NPT Female Thread |
M5 Male Thread |
0.74 |
26 |
1.27 |
72.5 |
|
|
 |
VR09-G | G
1/4" Female Thread |
G
1/8" Female Thread |
M5 Male Thread |
0.74 (21) |
26 (660) |
1.27 (36) |
72.5 |
Important:
If VR vacuum pumps are being used directly on a cup and compressed
air power is lost, there is no check valve in the system, and thus no way to
prevent the load
from releasing.
|
|
|
For Technical and Performance Specifications for the various Nozzle Sizes, click
here
| ||||||||
View Printer-Friendly PDF Page
