 Vacuum
Generators and Vacuum Stations
Battery
Powered Vac-Packs
BAE1 Series
Vacuum Stations
View Printer-Friendly PDF Page
|
 |
ANVER’s BAE1 Series
Vac-Pack Vacuum Generator contains the same features as the standard VPE1
Series but includes a heavy duty rechargeable 12 volt DC battery, making
it suitable for handling non-porous loads. It is commonly used for special
applications where AC power is not readily available. Options:
-
Other BAE1 Series Frame
Configurations
Different frame configurations are available - consult factory for
further information.
-
Battery Charger
(GC-CHARGE-10)
Integrated 10 hw battery charger is an advanced battery charger
designed specifically for today’s high performance deep-cycle
lead-acid batteries. It provides microprocessor controlled three- step
charging. The Twist-lock receptacles, both the male and female are
supplied, prevent accidental disconnection from the 110V AC power
source. The charger is interlocked to prevent Vac- Pack from being
used during charging. A “charger on” indicator light located on front
cover of Vac-Pack will illuminate when battery is being charged.
-
Other Batteries
100 amp hour sealed batteries are available to increase operation
duration or for heavy duty applications.
|
 |
Part
Number |
Description |
|
BAE1-RA |
Remote
Vacuum Station, Battery Powered |
 Features:
- VacGuard™ Vacuum Control System
This revolutionary solid-state Vacuum Control System combines all the required vacuum generator controls in a rugged, compact ABS enclosure. The VacGuard controls all vacuum pump functions, safety lights and can be fitted with an optional audible vacuum leakage warning system.
- Front Controls and Gauges
All controls and gauges are mounted on the front of the unit for easy access and viewing. The control pendant provides attach/release at the operator’s fingertips. Gauges indicate the level and stability of vacuum in the manifold and vacuum reservoir. Battery charge indicator shows battery condition.
- Indicator Lights
• Amber light indicates “power on” for Vac-Pack Vacuum Generator.
• Green light indicates, “safe” vacuum level.
• Red light indicates, “unsafe” vacuum level.
• Battery charge indicator.
- Vacuum Retention
An internal check valve is included to prevent vacuum loss through the
manifold in the event of a power failure. A vacuum reservoir assists in
maintaining a safe vacuum level during a power failure.
- Audible Vacuum Leakage
Warning System (VLS-03E)
Integrated electronically controlled vacuum leakage sensor monitors
vacuum level and triggers a visual and audible alarm in the event of
an unsafe vacuum level.
Maintenance:
- Bottom Hinged Front Cover and
Removable Top Back Cover:
For easy access to all components
- Clear Air Filter Cover:
Located on the front of the unit, the filter cover is clear for quick inspection and unscrews for easy cleaning.
Pump Specifications:
- The 2.2 CFM piston pump is driven by a 1/3 HP
motor that operates on 12 volts DC. The VacGuard Vacuum Control System
continuously attempts to maintain a safe vacuum level by cycling the vacuum
motor/pump on or off as required. The VacGuard high and low vacuum limits are
preset at the factory.
- Weight: 156 lb
Battery Specifications:
- 80 amp hour, sealed battery can provide full 8
hour shift operation in many applications.
- Includes battery case with mounting brackets.
|
