| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
View Printer-Friendly PDF Page|
|
The fewer the number of leaks in your vacuum handling system, the greater the lifting capacity you will have with your vacuum pad attachment. This is where these quality vacuum hose connection accessories really pay for themselves. By selecting and using these connectors with ANVER High Flow vacuum hose, you can achieve virtually airtight connections throughout your system. Wherever you have connections, we recommend that plastic cuffs be used on all hose ends that are clamped onto our metal barbed fittings. Teflon tape should be used to seal these fittings. ANVER makes it simple to get the most out of your High-Flow Vacuum Hose applications with this line of durable, easy-to-use Connection Accessories. We offer everything from a simple hose cuff or barb to our special filter fittings to our unique diverter valve. Sometimes, a small amount of money spent on these accessories can save you from having to buy a larger, more expensive vacuum pump. |
Plastic Hose Connectors and Cuffs:
 |
Product Photo |
Part No. |
Description |
Hose Clamp |
Vacuum Hose |
 |
HPC150-2-CUFF | Cuff, for 1½" (38.1 mm) Vacuum Hose to 2" (50.8 mm) Barb |
Not Necessary |
 |
|
 |
HPC150-CON | Connector, for 1½" (38.1 mm) Light Blue Vacuum Hose |
Not Necessary |
|
|
 |
Cuff, Standard for 1½" (38.1 mm) Blue Vacuum Hose |
 |
|
||
| - | Product Photo | Part No. | Description | Hose | |
 |
HPC200-150-CUFF | Cuff, for 2" (50.8 mm) Vacuum Hose to 1½" (38.1 mm) Barb |
|
 |
|
 |
HPC200-CON | Connector, Hose for 2" (50.8 mm) Vacuum Hose |
Not Necessary |
|
|
 |
HPC200-CUFF | Cuff, Vinyl Screw for 2" (50.8 mm) Vacuum Hose |
 |
|
|
 |
HPC250-CON | Connector, Hose for 2.5" (63.5 mm) Vacuum Hose |
 |
 |
|
 |
HPC250-CUFF | Cuff, Vinyl Screw for 2.5" (63.5 mm) Vacuum Hose |
|
|
PLEASE NOTE: ANVER HPC Series Plastic Hose Connectors and Cuffs are designed for, and work ONLY with, ANVER HP Series Plastic Vacuum Hose. Consult Factory.
|
|
Product
Photo |
Part No. |
Description |
Use of Teflon Tape Recommended |
Vacuum Hose |
Clamps for Hose |
 |
AA100P | Hose Barb, 1" NPT X 1" (25.4 mm) Hose (Galvanized) |
 |
 |
 |
|
 |
 |
|||||
 |
AA112P | Hose Barb, 1½" NPT X 1½" (38.1 mm) Hose (Galvanized) |
|
 |
 |
|
 |
PHB112X112 | Hose Barb, 1½" NPT X 1½" (38.1 mm) Hose (Reinforced Polypropylene) |
|
|
|
|
 |
AA112X200P | Hose Barb, 1½" NPT X 2" (50.8 mm) Hose (Galvanized) |
|
 |
 |
|
 |
|
|||||
 |
PHB112X2 | Hose Barb, 1½" NPT X 2" (50.8 mm) Hose (Reinforced Polypropylene) |
|
|
|
|
|
|
|
|||||
 |
AA114P | Hose Barb, 1¼" NPT X 1¼" (31.8 MM) Hose (Galvanized) |
|
 |
|
|
 |
|
|||||
 |
PHB114X114 | Hose Barb, 1¼" NPT X 1¼" (31.8 MM) Hose (Reinforced Polypropylene) |
|
|
|
|
|
|
|
|||||
 |
AA200P | Metal Hose Barb, 2" NPT X 2" (50.8 mm) Hose (Galvanized) |
|
|
|
|
|
|
|
|||||
|
|
PHB2X2 | Metal Hose Barb, 2" NPT X 2" (50.8 mm) Hose (Reinforced Polypropylene) |
|
|
|
|
|
|
|
|||||
 |
AA200X212P | Metal Hose Barb, 2" NPT X 2½" (63.5 mm) Hose (Galvanized) |
|
 |
 |
|
 |
AA212P | Metal Hose Barb, 2½" NPT X 2½" (63.5 mm) Hose (Galvanized) |
|
|
|
 |
Smaller Hose Barbs are also available. |
Special Fittings for ANVER Lifters:
|
|
Product Photo (Click to Enlarge) |
Part No. | Description |
Plastic Hose Cuff |
Hose Clamp | Vacuum Hose |
 |
FLT-3-CWG | 2" (50.8 mm) Hose x 2" (50.8 mm) Hose Cuff with Vacuum Gauge Assembly for FLT-3 Filter Assembly | ||||
 |
FLT-3-2CUFF | 2" (50.8 mm) Hose x 2" (50.8 mm) Hose Cuff | ||||
 |
FLT-3-2-1.5CUFF | 2" (50.8 mm) Hose x 1.5" (38.1 mm) Hose Cuff | ||||
 |
FLT-3-2.5-2CUFF | 2.5" (63.5 mm) Hose x 2.5" (63.5 mm) Hose Cuff | ||||
 |
DV-2-3W-2.0A | Three-Way Diverter Valve is designed to allow you to attach two Vacuum Tube Lifters to one vacuum pump |
 |
|
|
|
| ||||||||