Vacuum Lifting System Accessories
Vacuum Lift Tube Clamps and Rubber Clamping Bands

Lift Tube Clamps
ANVER Vacuum Lift Tube Clamps are just the thing for attaching vacuum lift tubes to either the Top Swivel or Lower Lifting Head. They are a combination wire clamp and hose clamp and work great for this application. These clamps allow you to simply stretch the Lift Tube on and directly clamp it without cutting the wire out of the Vacuum Lift Tube. The wire of the clamp meshes with the wire of the lift tube for a tight, secure, airtight grip. The TB Series is used for larger capacity tubes that need greater torque. An optional wrap of duct tape is sometimes useful to cover the sharp parts of the clamp worm drive.

Rubber Clamping Bands
Stretching an ANVER seamless Rubber Clamping Band over the vacuum lift tube clamp makes for a clean, professional transition.

We recommend two clamps on top and one on bottom for the 90 to 200 mm size and one heavier TB Series clamp top and bottom with the 250 lift tubes. ANVER Vacuum Lift Tube Clamps can be reused as they feature a worm gear tightening mechanism.

Clamp
Part
Number

Clamping Band
Description

CLP-100-D

Rubber Clamping Band
for 90 mm & 100mm Lift Tubes
1 on Top, 1 on Bottom

CLP-120-D

Rubber Clamping Band
for 120mm & 140mm Lift Tubes
1 on Top, 1 on Bottom

CLP-140-D

CLP-160-D

Rubber Clamping Band
for 160mm & 180mm Lift Tubes
1 on Top, 1 on Bottom

CLP-180-D

Rubber Clamping Band
for 200mm Lift Tubes
1 on Top, 1 on Bottom
(It is a tight fit for 250mm Lift
Tubes with new double clamp)

CLP-250-TB

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570

Copyright © ANVER Corp. 2008

Terms of use