|
 Vacuum
System Components
JTSED-W Electronic Vacuum
Switch
with Digital Readout
View Printer-Friendly PDF Page
 |
The JTSED-W Electronic Vacuum
Switch converts the vacuum level into digital output for connection to
PLC systems as well as into analog output for the on/off control. The JTSED-W Electronic Vacuum Switch
is identical to the JTSE switch except for the addition of a digital LED
display.
- Input Voltage: 10 -
24 V DC
- Accuracy: ±3.0% F.S.
 |
Part
Number |
|
JTSED-W |
|
 |
The
JTSED-W Digital Vacuum Switch Mounts Easily and Conveniently under the nozzle and
muffler of ANVER JB series Vacuum Generators. The Switch is provided with
4.9 ft (1.5m) of connection cable.
|
Specifications
for JTSED-W Vacuum Switch:
| Media |
Non-Corrosive gases
and Non-Lubricated air |
| Power
Supply |
10.8
~ 26.4 V DC, ripple (P-P) 10% max., Reverse Voltage Protection |
| 1 Switch Output |
N.C., max. 125 mA, LED indication on display, PNP version |
| Display |
2 digit |
| Pressure Units |
kPa |
| Hysteresis |
± 0.5% F.S. |
| Electrical
Connection |
Grommet
Lead Wire |
| Air Connection |
M5 Female and
G1/8" Male - Standard |
| Operation Accuracy |
± 3% F.S. |
| Thermal
Error |
±
3% F.S. in range 0 ~ 50 °C (32 ~ 122 °F) |
| Response Time |
< 5 ms |
| Current
Consumption |
<
35 mA |
| Dielectric Strength |
500 V AC 1 min |
| Insulation
Resistance |
>
100 M ohm at 500 V DC |
| Interference Emission |
As Per DIN EN 50081-1 |
| Immunity
to Interference |
As
Per DIN EN 50082-2 |
| Operating Temperature
Range |
0 ~ 60 °C (32 ~ 140
°F) |
| Storage
Temperature Range |
-10
~ 70 °C (14 ~ 158 °F) |
| Operating Humidity
Range |
10 ~ 85 % RH |
| Vibration |
10~55
Hz 1.5 mm (0.06"), XYZ, 2hrs |
| Mass |
35
g (1.24 oz) |
| Weight |
50
Grams |
 |
|
JTSED-W Electronic Vacuum
Switch with standard
G1/8"
male connector
|
To download the
complete
JTSED-W Instruction Sheet
in PDF format, click here.
|
