|
 Vacuum
System Components
Vacuum and Pressure Switches
Electronic
Vacuum Switch (JTSE-NPN)
View Printer-Friendly PDF Page
|
|
The JTSE-NPN Electronic Vacuum Switch converts
the vacuum level into digital output for connection to PLC systems as
well as into analog output for the on/off control. The JTSE-NPN Switch will
allow continuous feedback and adjustment capability over a 0 to 29.5 in
Hg range. This switch features an NPN Open Collector Output
Transistor Configuration. (For PNP configuration see ANVER Pressure
Switch Model JTSE.)
NOTE: ANVER standard unit is PNP.
- Calculation Range: -1/0
bars
- Overpressure: +3 bars
| Request
for Quote |
Part
Number |
|
JTSE-NPN |
|
 |
The
JTSE-NPN Electronic Vacuum Switch connects easily and conveniently to ANVER JB Series
Vacuum Generators under the
nozzle and muffler.
|
Specifications
for JTSE Vacuum Switch:
| Pressure Media |
Non-corrosive gases |
| Power Supply |
10.8 - 30 V DC,
regulated |
| Current Consumption |
17 mA maximum @ 30 V
DC |
| Transistor Output |
N.O. 28 V DC, 80 mA
Maximum |
| Analog
Output |
1
± 0.1 V~ 5 ± 0, 1 V DC |
| Accuracy At |
± 0.3% of measuring
scale at constant temperature |
| Switch
Configuration |
1 Adjustable hysteresis output - 1 analog output |
| Setting Method |
Adjustable by Trimmer
Pot |
| Hysteresis |
A:
0 to 15% of the set value |
| Response time |
1 ms |
| Body
Materials |
Polyacetal
and polycarbonate |
| Dielectric strength |
500 V AC, 1 minute |
| Operating
Temperature |
-20
to +70°C (storage: -20 to +80°C) |
| Operating Humidity |
35 ~ 85% RH (no
condensation) |
| Electrical
Connection |
Cable (1.5 meters long)
with 4 loose leads |
| Pneumatic Connection |
R1/8 male with M5
female port |
| Weight |
50
g |
To download the complete
JTSE-NPN Instruction Sheet
in PDF format, click here.
If you don’t have a
copy of Acrobat Reader,
click here to go to the Adobe Web Site for
instructions on downloading a free copy of
the necessary software.
|
