ANVER Vacuum Lifters, Vacuum Cups, Vacuum Pumps, Vacuum Tube Lifters, Vacuum Sheet and Plate Lifters, Vacuum End-EffectorsHand Vacuum Cups and Suction Cups
Manually Operated Suction Hand Cups for Non-Porous Loads

PDF for Manually Operated Suction Hand Cups View Printer-Friendly PDF Page

Hold mouse over thumbnails for larger view
  Hold mouse over thumbnails for larger view
Hold mouse over thumbnails for larger view

 

  • The principle of operation is by lever or pump action. The round suction cups are pressed onto the clean, dry, non-porous surface of the object to be lifted. The lever grip is squeezed together or the cam levers are flipped into position. The rubber pads are then securely clamped to the surface by vacuum. To release, just flip back the levers.

  • Loads need to be smooth, relatively flat and non-porous. Surfaces should be free of oil, grease or water, otherwise slipping can occur. Nonporous materials such as glass, metal, Formica, plastics, fiberglass, linoleum and polished stone are good examples. The grip these suction cups obtain on a load surface is amazingly strong and has to be experienced to be appreciated. Semi-porous materials require using our air-powered hand vacuum cups.

  • ANVER suction hand cups are of the highest quality for reliability and safety. They display thoughtful design and attention to detail. Just look at the lever mechanisms or overall design, and you will see that ANVER suction hand cups are light, strong, and well finished. They have the feel of a well balanced tool and are much easier to use than older makes. Since their introduction, ANVER hand vacuum cups have become acknowledged as the finest available and the new standard in value.

ANVER Hand Vacuum Cups and Suction Cups can save time and eliminate cut fingers when lifting and handling unwieldy items.

  • Powerful and reliable, they will firmly hold on to most smooth, dry, nonporous surfaces making them ideal for handling difficult or bulky loads.

  • They allow you to attach a handle where you want one, thus reducing backaches, strains and cut fingers. Whether you are handling glass, polished stone, fiberglass or sheet metal, these hand suction cups are an inexpensive way to let you work better and more efficiently.

  • As professionals know, the right tool can make all the difference.

Quality Tools for the Professional:

Order
Online
Product
Photo
(Click to
Enlarge)

Part No.

Stock
Status
Carrying Capacity at an approximate
 4 to 1 Safety Factor
lb
(kg)

Description

buy.gif
$47.50

Suction Hand Cup, Single 4-3/4" (120mm) Aluminum Body 600.0 In
Stock

33 lb
(15 kg)

[4 to 1]

Suction Hand Cup, Single 4-3/4" (120mm) - Aluminum Body
Made in Germany.

buy.gif
$29.95

Suction Hand Cup, Single 4-3/4" (120mm) Plastic Body 600.1 In
Stock
33 lb
(15 kg)

[4 to 1]

Suction Hand Cup, Single 4-3/4" (120mm) - Plastic Body
Made in Germany.

buy.gif
$43.95

Suction Hand Cup, Double 4-3/4" (108mm) Aluminum Body 602.0 In
Stock
66 lb
(30 kg)

[4 to 1]

Suction Hand Cup, Double 4-3/4" (121mm) - Aluminum Body
Made in Germany.

buy.gif
$26.95

Suction Hand Cup, Double 4-3/4" (108mm) Plastic Body 602.1 Out of Stock 66 lb
(30 kg)

[4 to 1]

Suction Hand Cup, Double 4-3/4" (121mm) - Plastic Body - Versatile, rugged, light and well finished - You will not find a better double-cup model of this type at any price on the market today. A top quality cup at a great price. 
Made in Germany. 
An Excellent Value and a Top Seller!

buy.gif
$47.96
Web Special Price Only

Suction Hand Cup, Double Swivel 4-3/4" (108mm) Plastic Body 602.2 In
Stock
50 lb
(22.5 kg)

[4 to 1]

Suction Hand Cup, Double Swivel 4-3/4" (121mm) - Light Plastic Body with Flexible Heads for Curved Glass - the Top Seller for Automotive Glass Applications - 
Made in Germany.

buy.gif
$29.95

Suction Hand Cup, Double Cup - Aluminum 602.4 Out of Stock 66 lb
(30 kg)

[4 to 1]

Suction Hand Cup, Double 4-3/4" (121mm) - Aluminum Body - Versatile and rugged for flat glass -  A top quality cup at a great price.  
Made in Germany. 
Top Seller!

buy.gif
$70.73

Suction Hand Cup, Triple 4-3/4" (108mm) Aluminum Body 603.0 In
Stock
110 lb
(50 kg)

[4 to 1]

Suction Hand Cup, Triple 4-3/4" (121mm) Aluminum Body
Made in Germany.

buy.gif
$38.25
600.30 In
Stock
16.5 lb
(7.5 kg)

[4 to 1]
Side pull only

Suction Hand Cup, Single 4-3/4" (120mm) - Aluminum Body
Made in Germany.

buy.gif
$59.95
600.5 In
Stock
22 lb
(10 kg)

[4 to 1]

Suction Hand Cup, Single 3-1/2" (90mm) - Aluminum Body
Made in Germany.

buy.gif
$229.95

Suction Hand Cup, Triple 4-3/4" (108mm) Aluminum Body 608.0 Special Order

Consult
Factory

66 lb
(30 kg)

[4 to 1]
Top pull only

Suction Hand Cup, Single 7-1/4" (185mm) Aluminum Body (Horizontal)
Made in Germany.

buy.gif
$12.95

Suction Hand Cup, Single 3-3/8" (86mm) All Rubber 609.0 In
Stock
8.8 lb
(4 kg)

[4 to 1]

Suction Hand Cup, Single 3-3/8" (86mm) All Rubber
Made in Germany.

buy.gif
$29.95

609.2 In
Stock
8.8 lb
(4 kg)

[4 to 1]

Suction Hand Cup, Single 3-3/8" (86mm) All Rubber
Made in Germany.

buy.gif
$21.50

609.55 In
Stock
4.4 lb
(2 kg)

[4 to 1]

Suction Hand Cup, Single 2" (50mm) All Rubber
Made in Germany.

buy.gif
$16.50

Spare Rubber Suction Pad for 600.0 & 600.1 610.0 In
Stock
N/A

Spare Rubber Suction Pad for 600.0 & 600.1
Made in Germany.

buy.gif
$14.95

Spare Rubber Suction Pad For 602.0, 603.0, 604.0 614.0 In
Stock
N/A

Spare Rubber Suction Pad For 602.0, 603.0, 604.0. Comes with all parts necessary for assembly.
Made in Germany.

buy.gif
$60.50

Spare Rubber Suction Pad For 608.0 615.0 In
Stock
N/A

Spare Rubber Suction Pad For 608.0
Made in Germany.

buy.gif
$59.95

Spare Rubber Suction Pad For 608.1 615.1 In
Stock
N/A

Spare Rubber Suction Pad For 608.1
Made in Germany.

Caution: These suction hand cups are only designed for momentary hand use on clean, dry, smooth, non-porous loads. They work well on small or awkward loads without other natural handles. Their indicated carrying capacities are for handling clean, dry, smooth, non-porous surfaces at sea level with clean, dry, undamaged seals, properly used. We state their carrying capacity conservatively with a 4 to 1 vacuum safety factor when correctly attached. We recommend not exceeding this as our carrying capacities are realistic in real world conditions.

We recently revised our capacities down but we feel you will find our more conservative ratings are accurate for what is safe in most applications. Along with actual load testing, vacuum hand cup capacities are calculated by a formula  based on determining the surface area (cup diameter) under a fixed vacuum level and then dividing by a factor for safety. If you see a competitive cup of the same size with more capacity, it is simply that the competitive cup has a lower safety factor. 

These hand cups are totally unsuitable and unsafe for attachment to hoists, manipulators, fork-lifts or for use with any other lifting method or device. For such applications, please see our information on our Powered Vacuum Lifters and Vacuum Tube Lifting Systems.

Click here to view or download a copy of "How to Safely Use ANVER Hand Cups" in PDF format

The minimum hand cup order amount for all shipments destined for Canada, Mexico and the United States (including, Hawaii, Alaska and Puerto Rico) is $39.00. The hand cup sales order minimum for all other export destinations is $300.00. Your credit card will not be charged until the product is shipped.

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570

Home: www.anver.com    email:

Copyright © ANVER Corp. 2008

Terms of use