ANVER Vacuum Lifters, Vacuum Cups, Vacuum Pumps, Vacuum Tube Lifters, Vacuum Sheet and Plate Lifters, Vacuum End-EffectorsPowered Vacuum Lifters
with Powered Tilting for One-Person Manipulation of Loads


90° Powered Tilting
Click for Chart

 Typical Vacuum Lifters with powered tilt for handling your tilting needs with ease. Powered tilting action is designed to be stopped at any intermediate angle.
Single Pad Powered Tilt Models
Vacuum Lifter Model Number Rated Load Capacity
25S 250 lb 113 kg
50S 500 lb 227 kg
100S 1000 lb 454 kg
Two Pad Powered Tilt Models with Rectangular Pads
Vacuum Lifter Model Number Typical Beam Lengths Rated Load Capacity
50M2- 8x6   8x10   12x6 500 lb 227 kg
100M2- 8x6   8x10   12x6 1000 lb 454 kg
Two Pad Powered Tilt Models
Vacuum Lifter Model Number Typical Beam Lengths Rated Load Capacity
25M2- 5x4   6x4   8x4   10x4   12x4 250 lb 113 kg
50M2- 8x4   8x6   12x6 500 lb 227 kg
100M2- 8x6   12x6 1000 lb 454 kg
Three Pad In-line Powered Tilt Models with Rectangular Pads
Vacuum Lifter Model Number Typical Beam Lengths Rated Load Capacity
75M3- 8x6   10x6   12x6 750 lb 340 kg
150M3- 8x6   10x6   12x6 1500 lb 680 kg
Three Pad Powered Tilt Models
Vacuum Lifter Model Number Typical Beam Lengths Rated Load Capacity
100M3- 8x6   10x6   12x6 1000 lb 454 kg
150M3- 8x6   10x6   12x6 1500 lb 680 kg
Four Pad In-line Powered Tilt Models with Rectangular Pads
Vacuum Lifter Model Number Typical Beam Lengths Rated Load Capacity
100M4- 8x6   10x6   12x6 1000 lb 454 kg
150M4- 8x6   10x6   12x6 1500 lb 680 kg
200M4- 8x6   10x6   12x6 2000 lb 907 kg
Four Pad Powered Tilt Models
Vacuum Lifter Model Number Typical Beam Lengths Rated Load Capacity
25M4- 6x6   8x6   10x6   12x6 250 lb 113 kg
50M4- 10x6   12x6 500 lb 227 kg
100M4- 10x6   12x6 1000 lb 454 kg
Four Pad Powered Tilt Models
Four Pad Powered Tilt Models with Rectangular Pads
Vacuum Lifter Model Number Typical Beam Lengths Rated Load Capacity
100M4H- 10x6   12x6 1000 lb 454 kg
150M4H- 8x6   10x6   12x6 1500 lb 680 kg
200M4H- 10x6   12x6 2000 lb 907 kg
Six Pad Powered Tilt Models
Six Pad Powered Tilt Models
Vacuum Lifter Model Number Typical Beam Lengths Rated Load Capacity
150M6- 8x6   10x6 1500 lb 680 kg
Eight Pad Powered Tilt Pad Models
Eight Pad Powered Tilt Models
Vacuum Lifter Model Number Typical Beam Lengths Rated Load Capacity
25M8- 6x6   8x6   10x6 250 lb 113 kg
50M8- 10x6   12x6   16x6 500 lb 227 kg
100M8- 10x6   12x6   16x6 1000 lb 454 kg
200M8- 10x6   12x6   16x6   20x6 2000 lb 908 kg

*Note:  Eight pad models 20x6 sheet size available with electric VPE3 generator only.
Standard Powered Tilters with Foam Pads
Contact our application engineers to help you meet your lifting and tilting needs.
Custom Model Powered Tilters
Contact our application engineers to help you meet your lifting and tilting needs.
ANVER Vacuum Lifting for Material Handling. We can handle your material handling needs!
ANVER Vacuum Lifters comply fully with and meet the standards of US ANSI ASME Standard B30.20 for below-the-hook lifting devices, as well as complying with OSHA and most European requirements. Click here for more information on these safety standards.

ANVER Corp.,  36 Parmenter Rd,  Hudson, MA  01749  USA  -  Tel: 800-654-3500  -  978-568-0221  -  Fax: 978-568-1570
Home: www.anver.com    email:

Copyright © ANVER Corp. 2009

Terms of use