 |
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
ANVER Vacuum Lifters can be outfitted with a variety of Interchangeable Vacuum Pads and Vacuum Lifting Attachments for a wide range of material handling applications. Various single and multiple vacuum pad configurations can be installed on most of our standard vacuum generators. The below Vacuum Lifting Pad Attachments feature ANVER's proprietary rectangular vacuum cups with soft, long lips and deep profile are specifically designed for handling flat, rigid materials such as sheet and plate. They are also excellent for wood, composites, curved panels, stone and other materials. They feature a excellent, versatile design for most applications. |
Specifications for Rectangular AnverFlex Vacuum Pad Attachments:
|
 |
Product Photo (Click to Enlarge) |
Pad
Attachment Part No. |
Cup No. |
A in. (mm) |
B in. (mm) |
C in. (mm) |
Rated
Load* (Horizontal) lb (kg) |
|
 |
PAOC32-100-S-3 | OC32-100 | 10.50 (267) |
3.63 (92) |
3.00 (76) |
125 (57) |
||
 |
PAOC32-150-S-3 | OC32-150 | 15.50 (394) |
3.63 (92) |
3.00 (76) |
190 (86) |
||
|
|
PAOC46-112-S-3 | OC46-112 | 12.00 (305) |
4.75 (121) |
3.25 (83) |
200 (91) |
||
 |
PAOC56-177-S-3 | OC56-177 | 18.00 (457) |
5.88 (149) |
3.25 (83) |
400 (180) |
||
 |
PAOC64-200-S-3 | OC64-200 | 19.75 (502) |
6.75 (171) |
3.25 (83) |
550 (249) |
||
 |
PAOC32-100-2-3 | (2) OC32-100 |
21.75 (552) |
3.63 (92) |
3.00 (76) |
250 (114) |
||
 |
PAOC32-150-2-36 | (2) OC32-150 | Min. 32 (813) |
Max. 47 (1194) |
3.63 (92) |
6.46 (164) |
380 (172) |
|
*The
cup capacities shown above are based on 24"Hg at sea level with a safety factor
of two (2) in the horizontal (flat), and four (4) in the vertical (upright).
Rated Load Capacities are
estimated; actual capacity will vary based on the load surface and the level of
vacuum.
| ||||||||
View Printer-Friendly PDF Page
