|
 Vacuum Lifting Accessories
Vacuum Lifter Parking Stands
|
Click to Enlarge |
Parking Stands
In the "Down" position,
which is recommended when you store the vacuum lifter, they provide support for the lifter so
that the vacuum rubber seals will not touch the ground. This protects the
seals from damage as
well as helping to maintain their shape and prevent them from flattening out.
Two Styles of Parking Stands
Available: Standard Spring-Loaded and Pin-Release Styles.
- Spring-Loaded
Adjustable in Four Positions: Pull Sideways, Turn, Let Go and it Locks in
Position
Spring-Loaded Locking Mechanism Snaps into Position for One-sided, Quick
Adjustments
ANVER
Spring-Loaded, Adjustable,
Four Position Parking Stands keep the vacuum sealing rings clean and debris-free. PLUS, in
their other positions, they can be used to locate the lifter precisely over the load. They
feature rugged steel construction.
- Pin-Release
Parking Stands available for custom or larger lifters where standard
spring-loaded parking stands can not be used.
|
| Parking
Stand Part Number |
For Use
With |
| PS-150 |
M83M, M150M and other Air
and Electric vacuum lifters up to 2000 lb (909 kg) capacity and up to 190
inch (7.5 m) beam length. |
| Parking
Stand Part Number |
For Use
With |
| PS-250 |
M250M and
other Air and Electric vacuum lifters over 2000 lb (909 kg), and up to
4600 lb (2090 kg) capacity and up to 110 inch (4.3 m) beam length. |
|
Standard Spring-Loaded Parking
Stands - Click to Enlarge |
Folded-Down |
Folded-Out |
Folded-Up |
Folded-In |
| In a "Folded
In, Out or Up" position, parking stands provide a Grab Bar for
positioning the lifter easily and precisely onto the load from the side of the lifter. |
 Click
on Thumbnails below for a detailed view of Vacuum Lifter Parking Stands.
|
Custom
Pin-Release Parking Stands |
 |
 |
 |
 |
Go to Mechanical Vacuum Lifter Page |
