Battery Powered Vacuum Generators
Self-Contained Battery
Vacuum Stations
VPF-57-DC Series
ANVER’s VPF-57-DCP Vac-Pack Vacuum Generator
contains the same features as the standard VPF-57-AC Series but includes a heavy
duty rechargeable 12 volt DC battery, making it suitable for handling non-porous
loads. It is commonly used for special applications where AC power is not
readily available.
Features:
Front Mounted Controls and Gauges
Vacuum gauge is mounted on front cover for continuous monitoring by
operator. Also included is a filter view port to monitor filter for
cleaning.
Indicator Lights
• Amber light indicates “power on” for Vac-Pack Vacuum Generator.
• Red light indicates “charger-on” for battery charger.
Battery Gauge
Illuminated gauge for battery charge level.
Ergonomic Adjustable Front Handlebar
Easy to grasp, large loop handlebar enables the operator to easily and
safely maneuver the attached load without touching the load itself.
Handlebar can be adjusted for smaller size loads.
Attach and Release Controls
Attach and release push-button located on control pendant with 8ft long
coiled cord.
Vacuum Check Valve and Reservoir
A check valve with vacuum reservoir helps to maintain vacuum if
electrical power is interrupted, for safe handling of non-porous loads.
Automatic Vacuum Control for Vacuum
Pump
When Vac-Pack reaches preset vacuum level, the vacuum pump will
automatically stop running. During the lift cycle, if the Vac-Pack
reservoir loses some of its vacuum, the vacuum pump will automatically
restart and run until original preset vacuum level is attained. This
control will reduce battery draw to achieve full-shift operation.
Battery Charger (GC-CHARGE-1.5)
Integrated 1.5 amp battery charger is an advanced battery charger
designed specifically for today’s high performance deep-cycle AGM
batteries. It provides microprocessor controlled three-step charging. A
male receptacle is supplied to plug into a standard outlet. The charger
is interlocked to prevent Vac-Pack from being used during charging. A
“charger on” indicator light located on front cover of Vac-Pack will
illuminate when battery is being charged. The LED, on the GC-Charge-1.5,
steady GREEN indicates charge complete.
Vacuum Leakage Sensing System (VLS-08
& VLS-08-20) The VLS-08 (Series) are battery powered units consisting of solid
state circuitry with microprocessor, pressure sensor, LCD digital
display in inches of Hg, warning audible horn and red light. System is
plumbed to the Vac-Pack and monitors vacuum level triggering the alarm
in the event of a loss in vacuum level (10% loss for VLS-08 / 20% loss
for VLS-08-20).
Maintenance:
Oil-Less Diaphragm Vacuum
Pump Motor
Powerful 1/5 horsepower motor drives a 1.12 CFM piston vacuum pump.
Air Filter
High capacity air filter provides protection against pump damage. It is
mounted behind the front cover which has a view port for routine
inspection.
General:
Vacuum Pump Description
High-performance oil-less piston pump has a 1/5 hp motor capable of
generating 1.12 cfm. Motor is rated for 100% duty cycle. *NOTE: Vacuum
switch mounted inside the generator turns the pump off when operating vacuum
is reached in order to conserve battery life.
Frame Construction
The VPF-57-DCP Series has a fully welded frame with a vacuum reservoir and a
lifting bale and beam mounting hardware.
• Standard for 3”x3” beam [9” hardware centers] with a structural lifting
capacity rating up to 2,200 lbs (998 kg).
• Heavy Duty for 3”x6” beam [9” hardware centers] and reinforced lifting
bale with a structural lifting capacity rating up to 4,400 lbs (1,996 kg).
Battery Specifications
12 amp hour, sealed battery can provide full 8 hour shift operation in many
applications. *See Note above.
Versatility
For larger load lifting capability or alternate power requirements, ANVER
also offers other electric, air powered, and self-powered mechanical vacuum
generators. All units are provided with modular standard mounting designs
for easy interchangeability.
Options:
Optional Moisture Trap (WT-PF)
For damp applications: prevents moisture saturation of filter and possible
damage to pump. Not for handling wet loads.
