|
 Compressed
Air Powered Vacuum Generators
Low Headroom Air Powered
Vacuum Generators
VPFL4
AIR Series
|
 |
ANVER’s latest models of vacuum generators feature
high capacity pumps, valves, filters and gauges for trouble-free operation in
the most demanding production environments. Designed for use with a wide
assortment of vacuum lifter assemblies and interchangeable pad attachments.
These high quality Vac-Packs are ruggedly built, yet affordably priced for
unmatched value. The VPFL4 AIR Series features a sturdy welded frame
construction for compact heavy weight load lifting capability. |
|
Features:
- Air Powered Vacuum
Generator
No electric power required, operates using dry, clean compressed air for
vacuum generation. The vacuum generator incorporating a single stage
venturi with no moving parts or rubber gaskets to maintain or replace.
- Front Mounted Vacuum Gauge
Includes a vacuum indicator gauge, front mounted for continuous
monitoring by the operator.
- Ergonomic Adjustable Front
Handlebar
Easy to grasp, large loop handlebar enables the operator to easily and
safely maneuver the attached load without touching the load itself.
Handlebar can be adjusted for smaller loads.
- Slide Control Valve with
Standard Safety Interlock
The slide valve assembly allows vacuum attach and release and is mounted
to the front handlebar for convenient access by the operator. The
standard safety interlock is to keep the slide valve in the attach
position while lifting a load to prevent accidental load release.
- Vacuum Check Valve and
Reservoir
A check valve and a vacuum reservoir help to maintain vacuum if the
supply of compressed air is interrupted, for safe handling of non-porous
loads.
- Takes Standard Dry, Clean
Shop Air Input
Pressure to be regulated to 72.5 psi. Provided with 1/4” NPT input air
supply connector and shut-off slide valve.
- Vacuum Leakage Sensing
System (VLS-07 & VLS-07-20)
The VLS-07 (Series) are battery powered units consisting of solid state
circuitry with microprocessor, pressure sensor, LCD digital display in
inches of Hg, warning audible horn and red light. System is plumbed to
the Vac-Pack and monitors vacuum level triggering the alarm in the event
of a loss in vacuum level (10% loss for VLS-07 / 20% loss for
VLS-07-20).
- Air Filter
High capacity air filter provides protection against venturi damage. A
clear filter bowl to monitor filter for inspection and cleaning.
- Quick Disconnect Coupling
Socket Vacuum Port
All VPFL4 Air Series Generators are provided as standard with quick
disconnect coupling socket for interchangeability of pad attachments or
lifting frame assemblies. [Note: a quick disconnect coupling plug (P/N:
QDP-38F-B) must be provided on pad attachment or lifting frames. Contact
ANVER for information to suit application specifications.]
|
|
|
General:
- Standard Frame Construction
The VPFL4 Series has a fully welded frame with a vacuum reservoir and
structural lifting capacity* rating of 2,200 lb. (998 kg) for 3” sq.
beams with beam mounting hardware.
- Versatility
For larger load lifting capability or alternate power requirements,
ANVER offers electric powered and self-powered mechanical vacuum
generators, all with standard mounting designs for interchangeability.
|
Specifications:
Vacuum
Generator
Model No. |
Vacuum
Flow
(scfm) |
Air
Consumption
(scfm) |
Optimum
Input
Pressure
(psi)* |
Unit
Weight
lb
(kg) |
Application |
Beam Size |
| VPFL4-20-AIR |
4.3 |
6.5 |
72.5 |
25
(11) |
Most smooth,
non-porous materials |
3" Sq. |
|
VPFL4-25-AIR |
7.0 |
9.5 |
72.5 |
25
(11) |
Rough
or semi-porous materials, wood, stone, etc. |
3" Sq. |
|
VPFL4-30-AIR |
9.2 |
14.0 |
72.5 |
25
(11) |
Rough
or semi-porous materials, wood, stone, etc. |
3" Sq. |
* Air supply flow (CFM) may adversely affect
required pressure (psi) to achieve optimum vacuum level.
|
