Vacuum Tube Lifting Systems
Features, System Controls and Selecting the Right VT System

	Vacuum Tube Lifter Controls ANVER Vacuum Tube Lifter Controls (Standard or Optional Hummingbird ) are both designed for smooth operation and load lifting capability through a wide weight range. Both attach and release equally fast and are about as quiet.		Overview of Standard Features ANVER VT Vacuum Tube Lifting Systems grab the load (via vacuum suction), support, lift and lower the load without the use of a hoist, all by means of a single operator control.
	Selecting the Right Vacuum Tube Lifter Selecting the lifting system that will most efficiently meet your load lifting requirements will increase your productivity and make for a safer working environment.		System Features Simple to operate, require little operator training, and easily adjust to any operator's optimum working height.
	Release Assist Valve The VT-RAV-M/S-CV valve will aid in the release of any load, and is especially useful when handling loads that require extra effort to break the vacuum seal when attempting to release the load.		Compressed Air Assist An internal compressed air line to provide an auxiliary source of power to the tube lifter control head.
	Compressed Air Release and Lift The VT-RLV-M/S valve, when used with a VT Vacuum Tube Lifter equipped with ANVER’s CA Compressed Air Assist option, can aid in the release of an attached load and lifting of the vacuum tube lifter and pad attachment off the load when the lift tube is in its nearly fully compressed state.		Lifter in Action Movies of VT Lifters