 Vacuum
Tube Lifting Systems
Overview of Standard
Features
|
Click to Enlarge |
ANVER is the largest manufacturer of Vacuum Tube
Lifting systems in the United States with the widest selection of Vacuum Tube Lifters and
Replacement Vacuum Tube Lifter Parts
in the industry.
ANVER
VT Vacuum Tube Lifting
Systems are ergonomic lift assist devices that can help increase your productivity while offering an
economic solution to your
material handling needs. ANVER VT Vacuum Tube Lifting Systems are easy to use,
simple to maintain and require minimal
operator training.
ANVER VT
Vacuum Tube Lifting Systems grab the load
(via vacuum suction), support, lift and lower the load without the use of a
hoist, all by means of a single operator control.
The use of vacuum suction pads for attachment allows objects to be lifted without fear of damage
to the surface or edges of the product, often caused by manual lifts or
grabs. A remotely connected high-efficiency vacuum pump supplies vacuum
power to the vacuum lift tube to lift and lower the attached load. A Power Loss Safety
Check Valve built into the 360-degree top swivel slowly
lowers the load if power supply to the vacuum pump is interrupted.
|
|
The
following standard items are included with every ANVER VT Vacuum Tube Lift System:
|
ANVER VT Vacuum Tube Lift Systems are ideal for repetitive handling of either non-porous, semi-porous or
porous loads. Models are offered to handle loads
of from 5 lb (2.3
kg) for non-porous loads, all the way up to 660 lb (300 kg).
ANVER
Vacuum Tube Lifting Systems
are rapidly becoming the system of choice where single operator handling of
repetitive or heavy loads is required. Systems are in use at many of the largest US
manufacturers, yet their affordable pricing and ergonomic features have made them a practical tool for
even the
smallest companies.
Vacuum tube lifters are
being used for
packing small appliances,
electronic
equipment, furniture, virtually
any item to which a vacuum suction pad can be attached. Palletizing,
stacking,
loading and unloading bags,
sacks, cartons,
printed material,
buckets,
drums,
pails and
woven goods are among the typical uses.
Raw materials can
be lifted and lowered into position for weighing, emptying, or mixing
ingredients in the food, chemical or pharmaceutical industries. ANVER VT
vacuum tube lifting systems have also found their place in the manufacturing
assembly process for lifting and placing items into position, such as
lifting a TV picture tube into its chassis.
-
Since 1968, ANVER has been
manufacturing an extensive line of vacuum lifting systems, including vacuum tube
coil lifters,
wood
panel lifters, tilters and rotators. Our applications engineers
can provide a thorough technical review of your system requirements and help
you to select
the right vacuum lifter for your needs and budget from our extensive range of standard
and specialized vacuum lifting systems.
-
ANVER
includes select models of high efficiency vacuum pumps specially designed for ANVER as
part of its vacuum lifting systems. These quality vacuum pumps are made from tough, high-strength
materials for long life and are lightweight and virtually maintenance free. Their highly
efficient, state-of-the-art design has made older designs of conventional side-channel
vacuum blowers obsolete. Vacuum pumps are available in capacities of up to 480+ cfm flow and 18 in. Hg
vacuum. Powered by high quality TEFC motors, they are more energy efficient, require less
horsepower to operate than competitive models, and are offered in several sizes to match
your vacuum lifting requirements.
-
Compressed air powered vacuum
pumps for specialized handling of smaller loads or for use in explosive
environments are also available from Anver.
-
Auxiliary
compressed air powered lift assist vacuum
tube lifters are available for special load handling or
high load stacking
applications.
-
Vacuum Tube Lifting Systems can be easily
upgraded to larger sizes with
adapters in the field.
-
The top swivel mount is made of stainless steel,
and features a vacuum-tight totally sealed bearing for full 360-degree
rotation. A Power Loss Safety Valve allows the load to slowly lower
in case OF power supply interruption.
-
Hundreds of standard size
vacuum suction pads
are stocked for
immediate shipment, and custom
vacuum pad attachments can be manufactured for special applications. ANVER builds
pad attachments that are available nowhere else.
-
ANVER Vacuum Tube Lift Systems have the lowest
cost-in-use due to our low replacement parts prices and our use of
maintenance-free, direct drive vacuum pumps.
-
ANVER is the leading source for
spare
vacuum tube lifter parts,
vacuum pumps, motors,
vacuum pad attachments,
vacuum
hose, controls, etc. Our huge stock of quality parts
includes every competitor's vacuum lift tube size at half the competitors' prices!
|
|
Replacement parts
for all brands of vacuum tube lifters are
available from stock. Call us and see why our quality, service and prices have set the standard
in the vacuum material handling industry.
|
|
