ANVER Vacuum Cups and Suction Cups
Vacuum Cup Fittings – Group 1
Part Number: BM5 Captured O-Ring Barbed Fitting

BM5

RFQ

3D Content Central

Vacuum Fitting
Part No.

Connection
Thread Size

Thru Hole
Diameter

Hex Size

L
Height Added
to Assembly

H
Height

 

BM5 M5
(5 mm) 
male
0.09 in.
(2.3 mm)

0.31 in.
(8 mm)

0.20 in.
(5 mm)
0.35 in.
(9 mm)

Material: All-metal, electro-less nickel-plated brass fitting

Available Suspension Assemblies with Fittings

Suspension Assembly Group The combination of these fittings are required to connect the BM5 fitting to the listed suspensions
Connects directly.
No Fittings are required to connect the BM5 Suction Cup Fitting to SLSA1 Suspensions

Captured O-Ring Barbed Fitting

Features:

  • Reliability of a metal-to-metal mechanical fit between cup and level compensator

    or other mounting element

  • Captured O-Ring for superior vacuum seal

     

  • Precision machined barb design presses right into vacuum cup and seals tight

     

  • Quality Electroless Nickel Plated Brass for durability

     

The design of the Captured O-ring Barbed Fitting combines the reliable mechanical fit of a metal-to-metal connection with the unmatched static sealing qualities of an O-ring. Proper installation of the fitting allows the skirt around the O-ring to mechanically seat on the rim of the female thread, holding the fitting tight. A clean looking connection is achieved by concealing the high quality Buna-N O-ring from view inside the skirt of the fitting. The Buna-N O-ring is thus compressed, not pinched, within the fitting skirt ensuring a leak-proof fit even when mated with a less than perfect sealing surface. The mechanical fit keeps the fittings tight and retains its position even under constant vibration or movement of our SLSA Level Compensators. Our captured O-ring design eases installation and eliminates the need for replacement gaskets or washers as the seal is already in position. The seal is kept tight minimizing unnecessary vacuum loss.

Available Vacuum Suction Cups that use Fitting No. BM5
The BM5 Group 1 Fitting can be used with many
different Vacuum Suction Cups (too many to list here).
Small Vacuum Suction Cups (3mm - 20 mm)
Click either of these pages of cups

Small Cups
(2 mm – 20 mm)

Larger Cups
(21 mm – 165 mm)

 

and look for this image for available cups:
Group 1 Fittings